QSFP28 100G SR4 100M

QSFP28 100G SR4 100M

The QSFP28 100G-SR4-100m module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MTP/MPO connector.

Features of 100GQSFP28 SR4100m

4 channels full-duplex transceiver modules

Transmission data rate up to 25Gbps per channel

4 channels 850nm VCSEL array

4 channels PIN photo detector array

Hot-pluggable QSFP28 form factor

Maximum link length of 70m on OM3 Multimode Fiber(MMF) and 100m on OM4 MMF

Single 1X12 MPO connector receptacle Hot-pluggable electrical interface

0–70°C operating temp

Low power consumption < 2.5W

RoHS6 compliant (lead-free)

Applications of QSFP28 100G SR4 100m

100GBASE-SR4 100G Ethernet

Specifications of QSFP28 100G SR4 100m

Recommended Operating EnvironmentOptical Transmitter PerformanceOptical Receiver Performance

Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min	Typical	Max	Unit
Power Supply Voltage	VCC				V
Operating Case Temperature	TC	0	25	70	°C

Pin Descriptions of QSFP28 100G SR4 100m

Pin Definition of QSFP28 100G SR4 100m

Pin	Symbol	Name/Description
1	GND	Ground
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3 V Power supply receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground
20	GND	Ground
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground
27	ModPrsL	Module Present
28	IntL	Interrupt
29	Vcc Tx	+3.3 V Power supply transmitter
30	Vcc1	+3.3 V Power Supply
31	LPMode	Low Power Mode
32	GND	Ground
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground

Important Notice of QSFP28 100G SR4 100m

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative.

T&S Communicationsis a professional fiber optic accessories suppliers, we provide plc splitter 1x32, qsfp28 sr4and etc. Want to know more? Please contact us.

Другие товары поставщика

	MT FERRULE	The MT ferruleis a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and A...
	10G SFP+ DAC	SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 3...
	MTP®/MPO TRUNK CABLE	MTP®/MPO trunk cabling connects MTP®/MPO modules together as a permanent link. They facilitate rapid deployment of high-density backbone ca...
	FIBER OPTICAL CONNECTIVITY	Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we always cooperate with well-known connectivity suppliers for fiber op...
	FIBER PATCHCORD & PIGTAIL	patch cord pigtailnormally consists of optical fiber cable and connectors at both ends of the cable, the pigtail is connector assembled at one end，...

Все товары поставщика

Похожие товары

	Ball Lensed Fiber	Продавец: SHENZHEN PHOTONSTREAM LIMITED	Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin...
	Angle Polished Lensed Fiber	Продавец: SHENZHEN PHOTONSTREAM LIMITED	The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully...
	976nm 350W Fiber Coupled Laser Diode	Продавец: SHENZHEN PHOTONSTREAM LIMITED	976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ...
	940nm Fiber Coupled Laser Diode	Продавец: SHENZHEN PHOTONSTREAM LIMITED	940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ...
	940nm Band Pass Filter Optical Fiber	Продавец: SHENZHEN PHOTONSTREAM LIMITED	940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while...