Керамические композитные трубы
General description:
SHS-self-propagating alumina composite steel pipe is the new generation of wearable and corrosion resistant engineering pipeline, belongs to national "863" Hi-tech plan products. This pipe is composed of corundum(alpha-Al2O3), transit layer and steel from inside to outside, having good all round properties of corrosion resistant, wear-resistant, high temperature resistant and high strength, high toughness, high mechanical impact proof and thermal impact proof while it still can be processed by machining,grounding and welding etc.
Specifications:
Tube diameters: 50 to 1020mm
Elbow angle: 22.5, 45, 60, 90, 120, 135, 150 degrees, etc.
Three way pipes: Y shaped, Y lateral and other special shapes.
Four way pipes: straight cross, reducing cross.
Ceramic lining thickness: 3 to 8mm (including transition layer).
Ex-works length: less than or equal to 3m.
Customized maximum length can be achieved by welding.
We can also provide products of other customized sizes at your demand.
Packing: Seaworthy wooden cases.
Material property:
The alumina layer is formed by molten alumina at a temperature above 2500 degree Celsius. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the alumina layer has high density and smooth surface and bonds to the steel pipe.
1. Alumina layer containing AL2O3 over 90%, acid fashness 96-98%, same as that of high corundum ceramic;
2. Ten times of anti-corrosion than that of stainless steel;
3. Wear-resistance is equivalent to carboloy ,more than dozen times of steel;
4. Can sustain long period operation under 900 degree Celsius.
Features:
High abrasion resistant:
Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungste-cobalthard alloys, and the abrasion resistance is 20 times as carbon steel pipes. Its rigidity is the highest among all oxides.
Corrosion resistant:
Corundum is a neutral material, and is ac-proof and foulingfree.
Heat resistant:
The pipe can work under circumstances of -50 to 800 degrees Celsius.
Convenient installation:
It is much lighter than any other types of composite pipes, and can be welded or connected through flanges.
Cost effective:
Ceramic-lined composite steel pipe can take the place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce mainten nce cost.
Другие товары поставщика
|
|
spiral welded steel pipe |
Brief Introduction:
This product is widely used for conveyance of oil, natural gas, tap water, and sewage in plumbing system, heating network reco... |
|
|
Керамические трубы |
Ceramic Tile Lined Steel Pipe have very uniform coating of a specially formulated ceramic material that is affixed to the inner of the pipe and giv... |
|
|
Стальные трубы с биметаллическими стенками |
Its outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining
via centrifugal forming technique. Outer of be... |
|
|
Трубы стальные литые |
Introuduction:
High strength rare earth alloy casting steel pipes (thermal resistance and wear-resistance) used as coal conveying, power convey... |
|
|
Аттапульгитовая глина |
Structrue and Composition
Attapulgite is a kind of crystalloid hydrous magnesium-aluminum silicate mineral, having a special laminated chain struc... |
Все товары поставщика
Похожие товары
