BMC/SMC Mould

• 
• 
• 
• 
• 

BMC/SMC plasticMoulding Description:

We mainly use injection molding and pressure molding as the methods. When designing the flow channel and parting surface, we think that the cavity pressure should be as small as possible, especially some small ribs, as well as the smooth exhaust, the discharge position, shape, and material flow direction, which would all be fully considered. And the active exhaust must be complete with an overflow. We guarantee the appearance and strength. With the Vacuuming structure, the mold temperature balance is consistent as the appearance and strength of the product shall be guaranteed as well.

BMC/SMC injection moldingFeatures:

high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof, low energy consumption, no waste, no need to clean the mold cavity, mold The temperature is stable, the temperature difference is small, the breakage is short, poor appearance is less, and the efficiency is high.

About BMC/SMC Moulding：

The basic process of the compression molding process is to place a certain amount of the pre-treated molding material into a preheating compression mold, and apply a higher pressure to fill the mold cavity with the molding material. Under the predetermined temperature conditions, the molding material is gradually solidified in the cavity, and then the SMC product is taken out from the stamper, and the necessary auxiliary processing is performed to obtain the final product.

The SMCmolding processof the composite molded product is a process of solidifying into a product in a cavity after the binder is loaded or heated under the condition that the curing agent is present or heated. Molding temperature, molding pressure and mold exhaust, temperature balance, and mold structure all affect the quality of SMC products. It is necessary to determine the best solution under the consideration of various influencing factors.

BMC is the initial abbreviation of English Bulk Molding Compound, and the Chinese name is a group molding compound. Pre-mixed into a paste by unsaturated polyester resin, low shrinkage/low profile additive, initiator, internal mold release agent, mineral filler, etc., and then added thickener, colorant, etc., with different lengths of glass fiber, in special Stirring in the kettle is carried out to carry out a thickening process, which finally forms a dough-like intermediate material which can be used for molding and injection molding.

The bulk molding compound manufacturingprocess basically follows the same rules as the injection mold. However, SMC and BMC molds also have different characteristics from injection molds, such as flow path, exhaust, heating, cavity pressure and balance, parting structure, mold steel used and precision, shrinkage and injection molds. Differently, the BMC mold is molded at a high temperature, and the plastic mold is molded at a normal temperature.

SMC BMCmolds require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods.

Vacuum assisted systems for BMCinjection mouldsand SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. As one of the most professional sheet molding compound suppliersin China, Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers.

Zhejiang Aobang Technology Co., Ltd., established in 2010, is a backbone enterprise that manufactures composite mouldingat home and abroad. We sincerely hope to establish long-term and strong partnership with domestic and foreign businesses and business circles. We hope to gain recognition and support from our customers and to develop mutual cooperation. Just feel free to contact us!

Другие товары поставщика

	Automotive Motor	BMC/SMC PRODUCTS BMC/SMC Motor Servo Motor Plastic-Envelop Motor Over Moulding Products BMC Rotor BMC Stator Air Conditioner Motor Refrigerator...
	BMC/SMC Insulation	BMCInsulationand SMC Insulation High-strength, wear-resistant, fire-resistant, color BMCcompositematerial for medium and low voltage insulators su...
	Auto Parts And Accessories	Shell Moulding Description Mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner an...
	SMC BMC Molding for Electrical Appliances, Household Appliance	Household appliance including BMC appliancesand SMC appliances accessories have strict requirements for durability. These accessories may be used f...
	SMC Cable Braket	The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by...

Похожие товары

	Hose	Продавец: SUZHOU SEAPEAK CO.,LTD	Concrete PU Layflat Hose BUY qualified lay flat concrete pump hose from SEAPEAK! Our lay flat c...
	HIGH FRENQUENCY WELDED STEEL PIPE PRODUCTION LINE	Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd	A high frequency pipe welding machineis a system used for manufacturing steel pipes with high-fre...
	ANTI-CORROSION AND INSULATED STEEL PIPE PRODUCTION LINE	Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd	An anti-corrosion and insulated internal pipe coating equipmentproduction line is a specialized s...
	Bronze Globe Valve	Продавец: Zhejiang Carbo Bronze Co., LTD	Bronze Globe Valve Factory The closing component (disc) of a bronze globe valve rotates along th...
	Stainless Steel Capillary Tubes	Продавец: WENZHOU HUASHANG STEEL CO.,LTD	Product description Stainless Steel Capillary TubeDescription: Whether you need to exchange d...