Steel Bloom

• 

Description of Steel Bloom

Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the billet. The cross-section of the slab bloom is usually greater than 225 square centimeters and about 8 to 12 meters long. In the rolling mill, it is broken down into finished products such as bars, beams and sheet piles. In earlier mills, ingots were made from cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting.

Production Procedure of Steelbloom

The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated to about 1,250°C (2,300°F). The soaking pit is highly computerized and can be used for scheduling, firing rate, heating time (lasting 8 to 18 hours) and rolling programs.

After heating, the conveyor carries the hot ingot to a two-high reversing mill, which passes, again and again, turning the roll and roll table over each time the ingot passes. Since each pass reduces the bloom by only about 50mm, 21 passes may be required, including several edges pass, and the bloom stands upright on its edge to obtain a slab bloom billet of 150mm*150mm.

HUAROoffers high-quality steel products, steel raw material and other raw material. We depend on Huaruo worldwide supply chain tointroduce and export our superior products.

Другие товары поставщика

	Iron Ore Concentrate	Description of Iron Ore Concentrate Iron ore concentrate is produced from the magnetite iron ore in the beneficiation process. When the iron ore is...
	Iron Ore Concentrate	HUAROSteeloffers high-quality steel product, steel raw material and other raw material. We depend on Huaruo worldwide supply chain tointroduce and ...
	Hot Rolled Steel Plate	Main Feature of prime hot rolled steel sheet Hot steel coils production is a rolling procedure that relates rolling steel at a high temperature (u...
	Pickled Coils	Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking....
	Steel Bloom	Description of Steel Bloom Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the bill...

Похожие товары

	Steel Searcher Steel Product & Hardware	Продавец: STEEL SEARCHER HONG KONG LIMITED	Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ...
	Frac PU Layflat Hose	Продавец: SUZHOU SEAPEAK CO.,LTD	The outer cover of our PU layflat hose has been produced with extra thickness for tough environme...
	SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber	Продавец: Tengzhou Star Smith Metal Products Co.,Ltd	This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro...
	SDS Micro Copper Coated Steel Fiber	Продавец: Tengzhou Star Smith Metal Products Co.,Ltd	Micro brass fibers are made of copper coated steel wire , which is the most important materials o...
	SDS Loose Hooked End Steel Fiber	Продавец: Tengzhou Star Smith Metal Products Co.,Ltd	Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha...