Steel Bloom
Description of Steel Bloom
Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the billet. The cross-section of the slab bloom is usually greater than 225 square centimeters and about 8 to 12 meters long. In the rolling mill, it is broken down into finished products such as bars, beams and sheet piles. In earlier mills, ingots were made from cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting.
Production Procedure of Steelbloom
The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated to about 1,250°C (2,300°F). The soaking pit is highly computerized and can be used for scheduling, firing rate, heating time (lasting 8 to 18 hours) and rolling programs.
After heating, the conveyor carries the hot ingot to a two-high reversing mill, which passes, again and again, turning the roll and roll table over each time the ingot passes. Since each pass reduces the bloom by only about 50mm, 21 passes may be required, including several edges pass, and the bloom stands upright on its edge to obtain a slab bloom billet of 150mm*150mm.
HUAROoffers high-quality steel products, steel raw material and other raw material. We depend on Huaruo worldwide supply chain tointroduce and export our superior products.
在线联系供应商
Other supplier products
 |
Steel Pellet | Description and Production procedure of Steel Pellet Pellets are small balls of iron ore used in steel production. They are one of the important so... |
 |
Other Raw Material | There are many different types of raw materials(such as hbi iron ore)that HUARO handles.HUAROis a hbi plantin China.With reliable resources we prov... |
 |
STEEL PRODUCTS AND RAW MATERIALS FOR STEEL INDUSTRY | Steel Product Different types of raw steel productsare necessary for a host of different industries. And they are important commodities related to... |
 |
Direct Reduced Iron (DRI Steel) | Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron o... |
 |
Pickled Coils | Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking.... |
Same products
 |
Hot Rolled Galvanized Sheet | 卖方: North China Steel (Shandong) Co., Ltd. | Hot Rolled Galvanized Sheet Description Specifications & Technology:CustomizeGalvanized St... |
 |
Galvanized Seamless Pipe | 卖方: North China Steel (Shandong) Co., Ltd. | Galvanized Seamless Pipe Description Specifications & Technology:Customizeseamless steel p... |
 |
Galvanized Longitudinal Welded Pipe | 卖方: North China Steel (Shandong) Co., Ltd. | Galvanized Longitudinal Welded Pipe Description Specification & Technology:Customizewholesal... |
 |
Electro-Galvanized Steel Pipe | 卖方: North China Steel (Shandong) Co., Ltd. | Electro-Galvanized Steel Pipe Description Specifications & Technology: Customizewholesale ga... |
 |
Hot Rolled Galvanized Steel Coil | 卖方: North China Steel (Shandong) Co., Ltd. | Hot Rolled Galvanized Steel Coil Description Specifications & Technology: Customize accordin... |
