C/Z Purlin Roll Forming Machine
The automatic/semi-automatic C&Z purlin roll forming machine uses one equipment to be possible to produce the C&Z purlin by the automatic/manual simple control system for different sizes. When the size change, the operator does not need to replace the forming roller.
The production process selects the automatic control method, the operator can change the parameters by PLC control system for cutting length, the longitudinal pitch of holes, quantity and so on to carry on the automatic punch holes, cutting and roll forming.
This line consists with the guider, leveler, hydraulic hole punch device, the hydraulic cutting device, fast roller exchange forming machine, the electrically controlled system, etc.
The frame of forming machine is welded by Steel board, planer finishing treatment.
Riser: connected by 50x50 square steel to be gantry type bearing block; block hole is with wire-cutting, making sure the profile straight and high precision.
Hydraulic cutting according to the exact profile and make sure no waste of the final profile.
PLC control the cutting length of the profile, hydraulic punching holes and the distance between holes can be adjustable.
The material of the roller: GCr15, with quenching treatment, which has strong abrasive resistance.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
CORRUGATED SHEET ROLL FORMING MACHINE | CORRUGATED SHEET ROLL FORMING MACHINE Corrugated sheet roll forming machineis Suitable for simple roof construction, it is the most economical sys... |
|
|
ALUMINIUM ROLL FORMING MACHINE | How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminum profile cold forming ... |
 |
C PURLIN ROLL FORMING MACHINE | Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck... |
 |
C & U CHANNEL UNISTRUCT METAL ROLL FORMING MACHINEE | Slip Roll Former Width of material sheet:≤200 mm Thickness of material sheet: 2.0~2.5 mm Power: 380V, 50Hz, 3 phase Forming Speed with punchi... |
 |
GUARDRAIL ROLL FORMING MACHINE | A highway guardrail roll forming machine or a crash guard roll forming machine produced by the most common profile wave guardrail used in highway c... |
Похожие товары
|
|
AEMK 588 Loader | Продавец: AEMK MACHINE CO.,LTD | Высота кабины: 2670 мм Габаритные размеры (Д * Ш * В): 5700*2000*2670 мм Противовес передних коле... |
 |
Quick Change Worktable | Продавец: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | Продавец: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | Продавец: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | Продавец: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
