EPS Sandwich Panel Line
laminator for corrugated sandwich panel is a integrated production line consisting of a roll forming machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting. The whole machine is under control of PLC.The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and corrugated sandwich panel.
Main technical parameter for EPS Sandwich Panel Line
Sandwich panel specification |
Length: Min cutting length is 2 mMax cutting length is 15m: (see profile drawing)Thickness: (see profile drawing) |
raw material specification |
coil thickness: 0.4~0.6 mm (steel be flat without ups and downs,deformation and bending)sheet yield stress: ≤235MPacoil max : 1200 mm (tolerance±2mm)coil max weight: 4Tcoil ID: Φ500 and Φ600 mmcoil OD: Φ1000 mmEPS material: density is≥18㎏/m3,unstraight of each side ≤1㎜/m,,curve ≤3㎜/m,surface be even, ineveness smaller than 1.5mm/m, EPS material single piece length more than 3m.Material suitable shape: see profile drawingMaterial suitable : minimum shall be 1/2mm of the finished panel |
Machine line specification |
Work line speed : 1000-3000 mm/min (frequency speed adjustment).Attention: depend on glue brand, temperature and proficiency of operators.Machine length : about 40 mWorking : 1050 mm(panel output )Laminating effective length: 7.5 mControl way: adopt industrial computer PLCTotal power: about 35 kwPower: 380V/3phase/50 Hzcontrol voltage: 24 V/110 V/220 Vpneumatic: 0.7 Mpa (self prepared by factory) best working temperature:around 25℃Layout drawing for EPS Sandwich Panel Line |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Cable tray roll forming machine | is capable of making different sizes of cable trays. The cable trays produced by our cable tray roll forming machine are widely used in factories... | |
Guardrail Forming Machine | 2. The characteristics of guardrail are good appearance, high coverage, high strength, and high automation, low cost and long lifetime. Besides... | |
Special profile Roll forming machine | Special profile Roll forming machine is the continuous cold roll forming machine for producing steel structure panels.This series forming machine... | |
Roof tile making machine | This Roof tile making machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as t... | |
Plate Slitting Machine | The plate slitting machine is a kind of slitting equipment, which is mainly used in cutting and producing of cold-rolled steel coil, stainless st... |
Похожие товары
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... | |
Спиральная мойка камней | Продавец: Advanced Machinery Manufacture Co., Limited | Особенности продукции:Спиральная мойка камня - это машина для промывки песка, которая также делит... | |
Push Ball Valve | Продавец: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... | |
Вибрационный грохот | Продавец: Advanced Machinery Manufacture Co., Limited | Особенности продукции:1.Структура проста, объем ремонта небольшой, меньше инвестиций, небольшие в... | |
одноцилиндровый гидравлический конический станок | Продавец: Advanced Machinery Manufacture Co., Limited | Особенности продукции:1. Широкий диапазон применений: могут быть разбиты твердые породы, один и т... |