EPS Sandwich Panel Line
laminator for corrugated sandwich panel is a integrated production line consisting of a roll forming machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting. The whole machine is under control of PLC.The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and corrugated sandwich panel.
Main technical parameter for EPS Sandwich Panel Line
|
Sandwich panel specification |
Length: Min cutting length is 2 mMax cutting length is 15m: (see profile drawing)Thickness: (see profile drawing) |
|
raw material specification |
coil thickness: 0.4~0.6 mm (steel be flat without ups and downs,deformation and bending)sheet yield stress: ≤235MPacoil max : 1200 mm (tolerance±2mm)coil max weight: 4Tcoil ID: Φ500 and Φ600 mmcoil OD: Φ1000 mmEPS material: density is≥18㎏/m3,unstraight of each side ≤1㎜/m,,curve ≤3㎜/m,surface be even, ineveness smaller than 1.5mm/m, EPS material single piece length more than 3m.Material suitable shape: see profile drawingMaterial suitable : minimum shall be 1/2mm of the finished panel |
|
Machine line specification |
Work line speed : 1000-3000 mm/min (frequency speed adjustment).Attention: depend on glue brand, temperature and proficiency of operators.Machine length : about 40 mWorking : 1050 mm(panel output )Laminating effective length: 7.5 mControl way: adopt industrial computer PLCTotal power: about 35 kwPower: 380V/3phase/50 Hzcontrol voltage: 24 V/110 V/220 Vpneumatic: 0.7 Mpa (self prepared by factory) best working temperature:around 25℃Layout drawing for EPS Sandwich Panel Line |
Send product request
Other supplier products
 |
Wall Panel Forming Machine | Our metal wall panel roll forming machine has the feature of large quantity, high automation, low cost, and duration. The wall panel produced by ... |
 |
Automatic Sandwich Panel Making Machine | Automatic sandwich panel making machine is a integrated production line consisting of a roll forming machine and a sandwich panel laminating syst... |
 |
Guardrail Forming Machine | 2. The characteristics of guardrail are good appearance, high coverage, high strength, and high automation, low cost and long lifetime. Besides... |
 |
Plate Slitting Machine | The plate slitting machine is a kind of slitting equipment, which is mainly used in cutting and producing of cold-rolled steel coil, stainless st... |
 |
Sandwich Panel Line | Sandwich Panel Line is a integrated production line which consist of a roll forming machine and a sandwich penal laminating system. The line can ... |
Same products
 |
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | Seller: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... |
 |
Spiral washing and stone washing machine | Seller: Advanced Machinery Manufacture Co., Limited | Product Features: Spiral stone washing machine is a kind of sand washing machine, which is also d... |
 |
Push Ball Valve | Seller: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... |
 |
Drum screen vibrating screen Cement slurry high frequency screening machine | Seller: Advanced Machinery Manufacture Co., Limited | Product Features: 1. Simple structure, small maintenance, small investment, low vibration, and no... |
 |
Single cylinder hydraulic cone machine | Seller: Advanced Machinery Manufacture Co., Limited | product features: 1. Wide range of applications: It can break hard rocks, and the same host can o... |
