Maintenance Work for the FTM Straw Pellet Mill

• 

As to the maintenance work for straw pellet mill, it should start from the first run of straw pellet mill. After each run, you should clean the straw pellet mill and record the working condition.To make the work of straw pellet mill more smooth, you should check the distance between press roller and ring die timely.

Of course, the wearing condition of rollers should be included into the check content. To get the biomass pellets with excellent performance, you should make the distance between press roller and ring die at about 1.5-2.5mm.If distance between press roller and ring die is wider than 2.5mm,output and working efficiency of straw pellet millwill be seriously influenced.

As to the ways to adjust the distance between press rollers and ring die, they are listed into the following content. At first, you should use the hook spanner to dismantle the round screws and take off the roller plates. Then, you should use the allen wretch to dismantle the screws for clamping the eccentric shaft inside the scraper blade.

At last, you should use the wretch to rotate the eccentric part on shaft. For the work to dismantle the other press roller, it should be similar with the above content. After adjusting the distance well, you should fasten the locking screws, reset the linking boards and lock the round screws.

Known as the NO.1 brand of straw pellet mill,FTM China Machinerycan offer you the greater discounts on website to extend the world markets. Free E-books for you!

Fote Heavy Machinery:

Fote Official Email:

Отправить запрос, связаться с поставщиком

Кому: Henan Fote Heavy Machinery Co,. Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

	Мобильные дробилки: сильная поддержка для качества дома	В последние годы, как это не странно, чтобы посмотреть новости по телевизору о трагедии, которая people’с жизни угрожает опасность и понес рухнув...
	Wonderful Features of Liquid Fuel for Slurry Dryer	As we all know, for fuels used to heating the coal slime dryer, most of them are in liquid. Then, for liquid fuels, they are generally the heavy oi...
	Technical Advantages of FTM Hammer Crusher	Different crushers have different technical advantages. Compared with other crushers, hammer crusher machine is more obvious in the following techn...
	Как сделать поставщики дробилки VSI сильнее?	Наряду с развитием социальной экономики и изменяющимся требованиям рынка, все больше и больше предприятий посвящены промышленности дробилки. Если т...
	Maintenance Work for the FTM Straw Pellet Mill	As to the maintenance work for straw pellet mill, it should start from the first run of straw pellet mill. After each run, you should clean the str...

Все товары поставщика

Похожие товары

	HSC Paper Sheeting Machine	Продавец: Suzhou Paper Saw King Technology Co.,Ltd	HSC Paper Sheeting Machine Product Description HSC Paper Sheeting Machineincorporates an advanc...
	Bottom Feed Slitting Rewinder	Продавец: Suzhou Paper Saw King Technology Co.,Ltd	Bottom Feed Slitting Rewinder Product Description The bottom feed slitting rewinderreceives pap...
	HX Tape Laminating Slitting Rewinder	Продавец: Suzhou Paper Saw King Technology Co.,Ltd	HX Tape Laminating Slitting Rewinder Product Description The HX Tape Laminating Slitting Rewind...
	Full Servo Band Saw Paper Slitter	Продавец: Suzhou Paper Saw King Technology Co.,Ltd	Full Servo Band Saw Paper Slitter Product Description The Full Servo Band Saw Paper Roll Slitte...
	Z1500 Circular Saw Paper Roll Slitter	Продавец: Suzhou Paper Saw King Technology Co.,Ltd	Z1500 Circular Saw Paper Roll Slitter Main Characteristics Z1500 Circular Saw Paper Roll Slitte...