LFP Module
The structure of LFP modulemainly has a banding structure. Due to the high flexibility of banding modules, the quantity in series and parallel of lithium battery cells can be determined according to the demand of customers. Generally, Lithium Storage offers the following LFP battery module:
Flexibility in series and parallel 50~302Ah lithium battery cells, 1P8S or 1P4S LFP modules are common types.
Heating pad is optional
Connector type and definition can be customized
LFP Battery Module or Cell with Nut/Screw Terminals-Pack?
For improving production efficiency, the positive and negative terminals of lithium-ion batteries have been upgraded from screw-hole terminals to flat welding terminals. The new generation lithium batteries require welding equipment for battery connections. Sorting out the demand from the international market, many international customers still prefer to choose cells that screws or bolts can connect than flat welding terminals. The following points are pointed out by customers:
The total pack or module needs to be replaced once one cell of the battery pack fails in the operation. As well as, there is a dimension limit on module size for different application cases from the local market, and there is low feasibility of using the same module to meet all pack requirements. Therefore, customers prefer cells with nut/screw terminals for the flexibility of pack installation.
However, as a professional lithium-ion battery manufacturer in China, Lithium Storage recommends customers select LFP battery modules instead of cells with nut/screw terminals because of their high structural stability and welding reliability.
LFP Banding Module Structure
LFP Banding Module Structure
The LFP battery module has high flexibility in production due to its structural characteristic.
lithium battery cells are connected by an aluminum busbar via laser welding.
Banding belt structure, the upper part is a steel belt and the lower part is a plastic belt.
M4 hole on the aluminum busbar is applied to fix sampling wiring.
Bolt connection for the positive and negative output of modules
Standardized mold plastic end plate design
If you are looking for a reliable lithium ion battery factory, don't hesitate to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Standard Battery Pack | Standard Pack C&D is our standard Flexi Pack design using prismatic lithium iron phosphate cells LFP205Ah, LFP230Ah, LFP280Ah, and LFP302Ah. Th... |
 |
LiFePO4 302Ah Battery | Belong to GB 71173 series of dimension format Upgrade from LFP280Ah and higher energy density under similar dimension with LFP280Ah 4000times... |
 |
80V Lithium-ion Forklift Battery | Smart FLT Series: Forklift Lithium Battery 83.2V412Ah and 83.2V554Ah Remote&Onsite Product Support GPS&GPRS function Charger commu... |
 |
NCM102Ah Battery | Conform VDA 148 width of cell format The basic lithium ion battery cells to produce NCM102AH-1P6S VDA 355module NCM 523 with outstanding ener... |
 |
LiFePO4 230Ah Battery | LiFePO4 230Ahbattery belongs to the GB 54173 series of dimension format Upgrade from LFP205Ah and higher energy density under similar dimension ... |
