AC gapless metal oxide arrester
AC gapless metal oxide arrester
AC gapless metal oxide arrester (hereinafter referred to as arrester) is used to protect AC electrical equipment of corresponding voltage level from lightning overvoltage and operating overvoltage damage.
Product Implementation Standard: GB11032 - 2010 "AC electrical equipment arrester".
7Earthquake intensity 8 degrees and below;
This kind of arrester is assembled by superposition of non-linear zinc oxide resistors and sealed in high voltage insulating ceramic sleeve without any discharge gap.Under normal operating voltage, the arrester is insulated with high resistance; when it is impacted by overvoltage, the arrester is in low resistance state, releasing impulse current into the ground quickly, so that the voltage on the electrical equipment parallel to it is limited to the prescribed value, so as to ensure the safe operation of the electrical equipment.The arrester is equipped with a detachment device. When the arrester operates under overload or suffers accidental damage, the internal pressure increases sharply, so that the arrester can be detached from the device to ensure that the ceramic sleeve is not damaged.The arrester has the characteristics of good steep wave response, high shock current tolerance, low residual voltage, reliable operation, no power frequency continuous current, simple maintenance and so on.
Sex testing tests, the items are:
(1) DC or power frequency reference voltage test:
When the peak value of DC or AC resistive current flowing through the arrester reaches the reference current, read the voltage value, which is not less than the standard value.
(2) DC leakage current test:
The DC voltage value of 0.75U1mA is applied at both ends of the arrester (the voltage ripple rate is not more than (+1.5%). When the voltage is stabilized, the leakage current flowing through the arrester should not be greater than the standard value. The leakage current of the surge arrester in operation should be no more than 2 times of the measured value before commissioning.
(3) Detection of power frequency persistent current value:
Power Frequency Continuous Current Value, Leakage Current Tester or Sufficient for Use of Arresters
Accurate AC meter detection shows that the RMS or peak resistance current flowing through the arrester under operating power frequency voltage does not exceed 1.5 times of the initial measurement value.
Ⅵ. Attention:
(1) During transportation and storage, arresters should be placed vertically.
(2) Users are not allowed to disassemble lightning arresters at will.
(3) Users are not allowed to test the working frequency discharge voltage of the arrester in order to avoid damage to the arrester.
(4) Under the condition that users abide by the above rules, our factory is responsible for the three-package matters within the three-package period, which is one year.
If users have special needs, they can write to them. We will supply as required.
The company mainly product are low voltage switch cabinet, frequency converter cabinet. And we undertake various one-stop services such as preliminary exploration, design, survey, construction, manufacturing, operation and maintenance.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Intelligent Transmission and Distribution Automation System | Intelligent Transmission and Distribution Automation System This product is the monitoring unit of the overhead line power grid. It cooperates with... |
 |
Microcomputer Controlled Communication Power Supply Screen WSD-GZTW-2 | Microcomputer Controlled Communication Power Supply Screen WSD-GZTW-2 WSD-GZTW-2 is a communication power supply designed for different capacity us... |
 |
XL-21 low-voltage power distribution cabinet | XL-21 low-voltage power distribution cabinet Overview XL-21 Low Voltage Switch Cabinetis suitable for power plant, industry and mining enterprises.... |
 |
WSD-VZF(R)-27 Handcart Indoor High Voltage Vacuum Load Switch | WSD-VZF(R)-27 Handcart Indoor High Voltage Vacuum Load Switch Overview Main uses and scope of application WSD-VZF(R) -27/630-25 removable vacuum lo... |
 |
WSD-FLW34-24 SF6 load switch | WSD-FLW34-24 SF6 load switch WSD-FLW34-24 SF6 load switch is suitable for outdoor three-phase AC distribution systemwith rated voltage of 24 kV and... |
Похожие товары
 |
7.2KW AC EV Charger Socket Wallbox | Продавец: Religare Electric Co.,Ltd. | Our 7.2 KWHome ChargerSocket Wallbox is a robust, wall-mounted unit designed for speedy electric ... |
 |
3.7KW AC EV Charger Socket Wallbox | Продавец: Religare Electric Co.,Ltd. | Our 3.7 KWChargerSocket Wallbox is a compact, efficient EV charging station for home or small bus... |
 |
11KW AC EV Charger Socket Wallbox | Продавец: Religare Electric Co.,Ltd. | 11KW AC EV Charger Socket Wallbox Our 11KW AC EV Charger Socket Wallbox is a high-capacity, wall... |
 |
Made in China Pressure Switch HC0622-24 for thermal power plant | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Pressure Switch HC0622-24 for thermal power plant YOYIK professional production an... |
 |
Gas Torch | Продавец: Ningbo Shuai Xian Regulator Co., Ltd | Introduction Set packed with hoses, regulator arm support of gas Torch Gas blow torchSpecific... |
