ECO-WORTHY Wind Turbine Generator System With Controller for 12V/24V
Package Included
1 x Wind Turbine Generator
1 x turbine hybrid controller (which can connect to solar panel & wind generator, and it auto work with 12V 24V)
3 x Blades
1 x Nose Cone
1 x Instruction Manual
1 set Screws and Nuts
Check Instruction for the
UK, Germany, Australia, China Stock Usually Ships in 3 to 5 Business Days
ECO-WORTHY 400W 12V Off Grid Wind Turbine Generator System
ECO-WORTHY 's Wind Turbine is a smart choice and affordable for remote homes and cabins in windy areas. Electricity produced by wind generation can be stored in batteries for household use when needed. Wind generators can be used alone, or they may be used as part of a hybrid system, in which their output is combined with that of photovoltaics. Hybrid systems are especially useful for winter backup of home systems where cloudy weather and windy conditions occur simultaneously.
Features
1. Max daily output at 1.4KW. It also works when there is only the wind power or solar power, getting hybrid or single power.
2. High-performance Nylon fiber blades by precision molding injection
3. Low start-up/cut-in wind speed by unique electro-magnet design
4. Protect from over-speed by blade aerodynamic elasticity
5. High efficient and compact alternator With high-performance NdFeB permanent magnet
6. With small moment generator of 0.08N.M for low start wind speed
7. Overspeed protection by special electrical design and aeroelastic blade
8. Hybrid controller for wind turbine and solar panel with PWM function 12V/24V
9. Aluminum housing design for good heat sink, lightweight and tough environment
| ElectricalSpecification | |
| RatedPower | 400w |
| RatedVoltage | DC12-24V |
| BatteryVoltage | DC12-24V |
| Start-upWindSpeed | 2.5m/s(8'/s) |
| RatedWindSpeed | 10.5m/S(35'/s) |
| Maximumwindspeed | 35m/s |
| RatedRotateSpeed | 800r/min |
| Batterycapacity | 200AH-400AH |
| Controlsystem | Automaticfandedicatedcontroller |
| Inverter | Puresinewaveinverter |
| Generatorstyle | Permanent-magento-phaseA.C |
| Fanbladequantity | 3 |
| Windleafmaterial | Carbonfibrecomposite |
| Rotordiameter | 1.2M |
| Towerdiameter | Suggestmorethan80mm |
| Altitudeoftowe | 4.5M-10M |
| Fanintheweight | 8KG |
| Polediameter | Outdiameter7.4cminnerdiameter5.3cm |
| Packingspecification | 687*365*210mm(27"x14.4"x8.3") |
| ProductLife | 15years |
| Warranty | 1year |
| Certification | CE |
| WindControllerSpecification | |
| RatedVoltage | DC12-24V |
| RatedWindGeneratorCapacity | 400W/800W |
| WindGeneratorBrakingVoltage | 14.5V/29V |
| WindGeneratorRecoverVoltage: | 13.2V/26.4V |
| RatedSolarPower | 500W/1000W |
| Max.DischargingCurrent | 20A |
| Batteryoverpressureprotection | 16.5V/33V（Closetheloadoutput） |
| Batterydischargeprotection | 10.7V/21.4V（Closetheloadoutput） |
| Batterydischargerecoveryvoltage | 12V/25V（Restoretheloadoutput） |
| QuiescentPowerConsumption | 15mA |
| AmbientTemperature | -35~+75℃ |
| Dimensions(LxWxH): | 150mm×87mm×28mm |
| IPProtectionLevel | IP67 |
Working Prince
1. There is wind, the wind turbine blade in the rotation, the kinetic energy of the wind is converted into mechanical energy, the spindle rotation to generate electricity
2. The controller will produce an alternating current into direct current put in the battery, achieve the goal for electric power
3. When battery when completely filled, the controller is disconnected charging current controller to uninstall state formation, to protect the battery will not overcharge
4. Inverter (only off-grid inverter should be applied here) main function is will have a low voltage DC wind generator, and battery storage of electrical energy is converted into ac 220V / 50 Hz alternating current (AC) to meet all kinds of household appliances use
Wiring
For the connection of the seven cable
1. Firstly, connect the positive poles of load, battery and solar panel to the red wire.
2. Next, connect the negative pole of load to the yellow wire of controller.
3. And then, connect the negative pole of the battery to the black wire of controller.
4. Finally, connect the negative pole of the solar panel to the blue wire of controller.
5. The three-phase voltage input lines of controller are respectively connected to the three-phase voltage output line (green line) of wind power generator.
6. After the wire connection, please wrap the joints in waterproof tape for preventing water from entering.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
ECO-WORTHY 400W off Grid Solar Kit: 4pcs 100W Solar Panels & Combiner Box & 60A Solar Controller &100aH 12V battery RV | Package Included: 4pcs 100W poly solar panel 1pc 6-string PV combiner box 1pc 100aH battery with battery box 1pc 60A solar charge controller 2pcs 5... |
 |
ECO-WORTHY 100-240V (ECO-WORTHY 100-240V ( 700) Automatic TV Lift Mount Bracket for 20"-57" LCD Flat TV W/ Controller 700) Automatic TV Lift Mount Bracket for 20"-57" LCD Flat TV W/ Controller | Package Included 1 pc remote control (RF)1 set 700mm adjustable lifter1 set TV mounting bracket China Stock Usually Ships in 5 to 7 Business Days... |
 |
ECO-WORTHY MC4 Connectors Male/Female for Solar Panel System | Package Included 1pcs MC4 male/female solar panel cable connectors (2/5/10/100sets option) China Stock Shipping Via Singapore Post Mail ECO-WORT... |
 |
ECO-WORTHY 18"(450mm) Stoke Linear Actuator 1500N 12V 5.7mm/S | Package Included 1pc ECO-WORTHY 18" (450mm) Stoke Linear Actuator 1500N 12V 5.7mm/s with mounting bracket UK, Germany, Australia China Stock Ship... |
 |
ECO-WORTHY 160W Flexible Solar Panel Battery Charge 18V 90cm Cable MC4 Connector For RV | Package Included: 1pcs 160W flexible mono solar panel. USA/ UK/AU/AsiaUsually Ships in 5 to 7 Business Days The Eco-Worthy series of flexible so... |
