ECO-WORTHY Wind Turbine Generator System With Controller for 12V/24V

1. Max daily output at 1.4KW. It also works when there is only the wind power or solar power, getting hybrid or single power.
2. High-performance Nylon fiber blades by precision molding injection
3. Low start-up/cut-in wind speed by unique electro-magnet design
4. Protect from over-speed by blade aerodynamic elasticity
5. High efficient and compact alternator With high-performance NdFeB permanent magnet
6. With small moment generator of 0.08N.M for low start wind speed
7. Overspeed protection by special electrical design and aeroelastic blade
8. Hybrid controller for wind turbine and solar panel with PWM function 12V/24V
9. Aluminum housing design for good heat sink, lightweight and tough environment

1. There is wind, the wind turbine blade in the rotation, the kinetic energy of the wind is converted into mechanical energy, the spindle rotation to generate electricity
2. The controller will produce an alternating current into direct current put in the battery, achieve the goal for electric power
3. When battery when completely filled, the controller is disconnected charging current controller to uninstall state formation, to protect the battery will not overcharge
4. Inverter (only off-grid inverter should be applied here) main function is will have a low voltage DC wind generator, and battery storage of electrical energy is converted into ac 220V / 50 Hz alternating current (AC) to meet all kinds of household appliances use

1. Firstly, connect the positive poles of load, battery and solar panel to the red wire.
2. Next, connect the negative pole of load to the yellow wire of controller.
3. And then, connect the negative pole of the battery to the black wire of controller.
4. Finally, connect the negative pole of the solar panel to the blue wire of controller.
5. The three-phase voltage input lines of controller are respectively connected to the three-phase voltage output line (green line) of wind power generator.
6. After the wire connection, please wrap the joints in waterproof tape for preventing water from entering.