Half Hole & Through Hole Pcb

Half Hole & through hole circuit board, no copper burr residue or warpage in half hole, reduce connectors and save space, apply to Bluetooth module and Signal receiver products. HUIHE CIRCUITS Half Hole & Through Hole PCB, apply to Bluetooth module and Signal receiver products. Has passed ISO9001 / ISO13485 /IATF16949 / UL /RoHS / REACH certification.

Half Hole & Through Hole PCB List

2 Layer OSP Impedance Control Half Hole PCB

2 Layer ENIG Half Hole PCB

4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board

2 layer ENIG impedance control half hole pcb

8 layer ENIG half hole custom PCB

4 layer ENIG impedance control half hole fr4 PCB

4 layer ENIG impedance control half hole PCB

4 layer LF-HASL half hole PCB

Production Process Of Metallized Half-Hole PCB

For the front inversion, to prevent the quality of the product and the need to make corrections in the later process, the production process of this type of board is processed according to the following process: a drilling (drilling, gong groove-plate surface plating-external Optical imaging-pattern plating-co-drying-half-hole processing-film stripping, etching, tin stripping-other processes-shape

Main Points Of Metallized Half-Hole PCB Production

The specific metallized half-holes are processed in the following way: all metallized half-hole PCB holes must be drilled in the pattern after plating, and one hole at the intersection of the two ends of the half-hole should be drilled before etching.

The engineering department formulates the MI process according to the process

The metal half-hole is the second-drilled half-hole drilled during the first drilling (or gong), after the image is plated, and before the etching. It is necessary to consider whether the copper will be exposed when the gong groove is shaped, and move the drilled half-hole into the unit.

he right hole is drilled first, and then the board is turned over (or mirrored) and the left hole is drilled to reduce the pulling of the copper of the inner hole of the half hole by the drill, resulting in the lack of copper of the hole.

The size of the drill nozzle for drilling the half hole depends on the spacing of the contour lines.

Draw the solder mask film, use the gong space as a stop point and open the window to increase 4mil treatment.

The Designer's Suggestion When Designing The Circuit

Change the distance from the edge line to the hole center. The general design is to place the hole center on the edge line and move the control center down. For example, the diameter of the hole is 1.4mm, the distance between the two holes is 2.54mm, and the board edge The distance between the line is 0.33mm from the center of the through hole, and the thickness of the plate is 0.6mm. The angle between the tangent to the cut point of the wall and the track of the milling cutter was 90 degrees before, but this time it is about 60 degrees. Because the board edge line is at a certain distance from the center of the through hole, the cutting angle of the milling cutter is changed, and the board thickness is extremely small, so the copper in the hole is not easily pulled out. The simultaneous improvement of small batch pcb design and production can greatly improve the production yield of pcb board with holes.

In our circuit board factory, we have types of pcb boardfor sale, if you have needs, please contact us.

Другие товары поставщика

	Layer Blind Buried Via PCB	Number of layers: 14 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/5mil Inner layer W/S: 4/3.5mil Thickness: 1.6mm Special process: Bl...
	High Tg PCB	PCB High TG, electric circuit board Glass transition temperature Tg≥170℃, electric pcb circuitboard High heat resistance is suitable for lead-fr...
	4 Layer High TG Impedance Control Fine Pitch PCB	Number of layers: 4 Surface finish: ENIG Base material: High TG FR4 Outer Layer W/S: 4/3.5mil Inner layer W/S: 4/3.5mil Thickness: 1.0mm Spec...
	4 Layer ENIG Impedance Control Half Hole Fr4 PCB	Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner layer W/S: 6/4mil Thickness: 0.8mm Special proces...
	16 Layer ENIG Press Fit Hole PCB	Previous image Next image Number of layers: 16 Surface finish: ENIG Base material: FR4 Thickness: 3.0mm size：420×560mm Outer Layer W/S...

Все товары поставщика

Похожие товары

	прерыватель тока	Продавец: 839459	Выключатель, являющийся ключевым компонентом защиты электросхемы, включает в себя безопасность, э...
	VZO-12-Вакуум-выключатель под открытым давлением	Продавец: 839459	Вакуумный разъединитель VZO-12 серии (сокращенный разъединитель vzo -12) является номинальным нап...
	Вакуумный выключатель	Продавец: 839459	Вакуум-выключатель с высоким давлением внутри закрытого дома: Вакуум-разъединитель высокого напря...
	Вакуумный выключатель	Продавец: 839459	Вакуум-выключатель с боковой внутренней напряженностью: Вакуумные выключатели, как правило, делят...
	DELIVER MOLDING MECHANICAL DESIGNS SYSTEMATICALLY	Продавец: GreensTone (Shenzhen) Electronics Co., Limited	GreensTone mechanical design engineers will work with your team to design and test the best solut...