Electric Power

HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards.

There are 6 different types of HDI PCBs, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs.

HDI any-layer printed circuit boards are the next technological enhancement of HDI microvia printed circuit boards: all the electrical connections between the individual layers consist of laser-drilled microvias. The main advantage of this technology is that all the layers can be freely interconnected. To produce these circuit boards, PCBSky uses laser-drilled microvias electroplated with copper.

Special Technologies Used with HDI Any-layer Printed Circuit Boards

Edge plating for shielding and ground connection

Minimum track width and spacing in mass production around 40μm

Stacked microvias (plated copper or filled with conductive paste)

Cavities, countersunk holes or depth milling

Solder resist in black, blue, green, etc.

Low-halogen material in standard and high Tg range

Low-DK Material for Mobile Devices

All recognised printed circuit board industry surfaces available

HDI PCB Technology Sheet

PCBSky HDI PCB Structures

PCBSky HDI PCB Capabilities: Microvias PCB

A microvia maintains a laser drilled diameter of typically 0.006" (150µm), 0.005" (125µm), or 0.004" (100µm), which are optically aligned and require a pad diameter typically 0.012" (300µm), 0.010" (250µm), or 0.008" (200µm), allowing additional routing density. Microvias can be via-in-pad, offset, staggered or stacked, non-conductive filled and copper plated over the top or solid copper filled or plated. Microvias add value when routing out of fine pitch BGAs such as 0.8 mm pitch devices and below.

Additionally, microvias add value when routing out of a 0.5 mm pitch device where staggered microvias can be used, however, routing micro-BGAs such as 0.4 mm, 0.3 mm, or 0.25 mm pitch device, requires the use of Stacked MicroVias using an inverted pyramid routing technique.

Any PCB Layer HDI

4/8 mil laser via capture pad size

Material Options

High temperature FR4

Halogen - Free

Welcome to order HDI PCB from PCBSky at a very competitive HDI PCB price.

Другие товары поставщика

	Hard Gold PCB	Hard Gold PCB, immersion gold pcb, is to immerse the board in the plating tank and apply current to form a nickel-gold coating on the copper foil s...
	Hard Gold PCB	Hard Gold PCB, immersion gold pcb, is to immerse the board in the plating tank and apply current to form a nickel-gold coating on the copper foil s...
	Electric Power	HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain...
	High Tg PCB	What is High Tg PCB When the temperature rises to a certain area, the substrate will change from "glass state" to "rubber state", and the temperatu...
	Double Sided Flexible PCB	After the double-sided PI board copper-clad board material is used in the double-sided circuit, a protective film is added on both sides to form a ...

Все товары поставщика

Похожие товары

	SPD for AC Power Supply	Продавец: Shenzhen Techwin Lightning Technologies Co., Ltd	SPD for AC Power Supply is mainly applicable to the power distribution systems for Class I / II /...
	Electric Chainsaw	Продавец: Zhejiang GuYueHu Industry&Trade Co.,Ltd.	Suca battery electric chainsawis not only powerful but also good for the environment. The electri...
	Matrix Body PDC Bit For Oil Well Drilling Hard Rock	Продавец: Cangzhou Great Drill Bits Co.,Ltd.	Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide...
	Matrix Body PDC Bit	Продавец: Cangzhou Great Drill Bits Co.,Ltd.	GREAT, as one of the professional drill bit manufacturers in China, we design and manufacture a w...
	Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency	Продавец: Cangzhou Great Drill Bits Co.,Ltd.	Overview of Hybrid Drill Bit Hybrid drill bits are compounded by the PDC fixed cutting and the r...