WATER METER SHAFT
The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called "lower ring chamber". On the top of the annular space, there is a "upper ring chamber" connected with the water outlet. The bottom of the sleeve has a filter screen with small holes to filter out the impurities in the water. There are two rows of round holes on the side of the sleeve. The position of the holes is just opposite to the upper and lower ring chambers of the shell. The inner core is divided into upper, middle and lower layers. The upper layer can be seen from the glass window, with only the pointer and dial. There is a plastic wheel in the lower layer. There are many plastic blades on the edge of the wheel, which is called "impeller".
The position of the impeller is just in the rotary flow formed by the hole in the lower layer of the casing pipe. The water flow impacts the blade around the wheel, and generates torque to make the impeller rotate. The bigger the faucet is, the faster the flow is, and the faster the impeller will turn.
Thus, the water meter shaftneeds to be corrosion-resistant, non rusting, water pressure resistant, relatively high hardness and no deformation. Tungsten steel water meter shaft has these advantages and perfectly replaced the steel shaft.
Xiamen Betalent Carbide Co., Ltd is a professional cemented carbide manufacturer. We provide Carbide Insert, Carbide End Mill, carbide product, carbide cutting tools for saleand so on. Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PILOT DRILL BIT | Xiamen Betalent Carbide Co., Ltd is a professional carbide products inc, focusing on designing, producing, and selling cemented carbide materials a... |
 |
CARBIDE ROD | Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.... |
 |
WATER METER SHAFT | The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called... |
 |
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL | 4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL Grain size Cutting dia. Grade ... |
 |
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM | 3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cutting dia. 16mm Grade BT50 ... |
Похожие товары
 |
Бесщеточный 2-скоростной литиевый аккумулятор для дрели 20-CD10 | Продавец: Nuevo Oriente Machinery & Electronic Co.,Ltd | Полный ассортимент бесщеточных систем 16 В и 20 В обеспечивает регулируемую скорость и безопасную... |
 |
Бесщеточная 2-скоростная литиевая ударная дрель-шуруповерт без аккумулятора 16-CID10 | Продавец: Nuevo Oriente Machinery & Electronic Co.,Ltd | Полный ассортимент бесщеточных систем 16 В и 20 В обеспечивает регулируемую скорость и безопасную... |
 |
Бесщеточный 2-скоростной литиевый аккумулятор для дрели 16-CD10 | Продавец: Nuevo Oriente Machinery & Electronic Co.,Ltd | Полный ассортимент бесщеточных систем 16 В и 20 В обеспечивает регулируемую скорость и безопасную... |
 |
бесщеточная 2-скоростная литиевая ударная дрель-аккумулятор | Продавец: Nuevo Oriente Machinery & Electronic Co.,Ltd | Полный ассортимент бесщеточных систем 16 В и 20 В обеспечивает регулируемую скорость и безопасную... |
 |
Matrix Body PDC Bit For Oil Well Drilling Hard Rock | Продавец: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide... |
