WATER METER SHAFT
The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called "lower ring chamber". On the top of the annular space, there is a "upper ring chamber" connected with the water outlet. The bottom of the sleeve has a filter screen with small holes to filter out the impurities in the water. There are two rows of round holes on the side of the sleeve. The position of the holes is just opposite to the upper and lower ring chambers of the shell. The inner core is divided into upper, middle and lower layers. The upper layer can be seen from the glass window, with only the pointer and dial. There is a plastic wheel in the lower layer. There are many plastic blades on the edge of the wheel, which is called "impeller".
The position of the impeller is just in the rotary flow formed by the hole in the lower layer of the casing pipe. The water flow impacts the blade around the wheel, and generates torque to make the impeller rotate. The bigger the faucet is, the faster the flow is, and the faster the impeller will turn.
Thus, the water meter shaftneeds to be corrosion-resistant, non rusting, water pressure resistant, relatively high hardness and no deformation. Tungsten steel water meter shaft has these advantages and perfectly replaced the steel shaft.
Xiamen Betalent Carbide Co., Ltd is a professional cemented carbide manufacturer. We provide Carbide Insert, Carbide End Mill, carbide product, carbide cutting tools for saleand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
PLOTTER BLADE HOLDER | As an essential spare part of vinyl plotter blade, plotter blade holder fixes the blade to plotter machine, to convenient customer who purchases p... | |
WIRE DRAWING DIE BLANK | According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working... | |
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL | 4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL Grain size Cutting dia. Grade ... | |
CEMENTED CARBIDE | Cemented carbide materialis a kind of alloy material which is made of hard compounds of an insoluble metal and binder metal by powder metallurgy pr... | |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer end mill: A suitable negative front angle design is adopted, which takes into account the edge stren... |
Same products
Matrix Body PDC Bit For Oil Well Drilling Hard Rock | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide... | |
Matrix Body PDC Bit | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | GREAT, as one of the professional drill bit manufacturers in China, we design and manufacture a w... | |
Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Hybrid Drill Bit Hybrid drill bits are compounded by the PDC fixed cutting and the r... | |
Three Blade Wings Drag Rock Drill Bit For soft formations | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Drag Bit Drag bitare manufactured from forged high-quality alloy steel and hard allo... | |
Well Drilling Equipment Crocodile PDC Reamer for Horizontal Drilling | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview PDC Reamer The PDC Reamersmanufactured by GREAT drill bit will be your best choice to d... |