waterproof Single-component thermal Silicone sealant for LED lighting application

• 

Product Features

Features：
One component adhesive/sealant
Cures at room temperature when exposed to moisture in the air.
Alkoxy cure system,
Non-sag, paste consistency
UL94 V-0

RoHs Compliance: Yes

Applications:
Sealing lids and housings
General sealing and component protection

Processing
All surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methyl ethyl ketone. Good unprimed adhesion may be obtained on a variety of substrates, including enameled and painted steel, aluminum, ceramics, glass and certain plastics. Substrates to which good adhesion is normally not obtained include PTFE, PE, PP and related materials. Apply a bead of BN-RT200 H Adhesive/ Sealant to one of the prepared surface, and then quickly cover with the substrate to be bonded. Very deep sections, will take longer to cure completely.

Cure time
After skin formation， cure continues inward from the surface. Cure time is extended at lower humidity levels. Before handling and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by the user for each specific application.

Packaging
100g/blister, 300ml cartridge.

Usable life and storage
BN-RT200 H has a shelf life of 12 months from the date of manufacture when stored at or below 30℃ in the original un opened containers.

Другие товары поставщика

	1.0-7.0 W/m·K silicone Thermal putty for heat sink computer services	Product Features Bornsun's BN-PN series (thermal putty) are mud-like thermal materials whose form is between thermal pad and thermal grease. Therma...
	Thermal Conductive compound for PCB/CPU/LED heat sink	ROHS Compliant: Yes UL recognized: Yes Features and Benefits: Thermal conductivity: 1~5.5 W/m·K Excellent thermal performance Good reliabil...
	silicone thermal insulating tube for Transistor application	roduct Features Benefits Thermal Insulating Tubes (for transistors), which are made from high insulating silicone rubber and high thermal conducti...
	Insulating sheet for heat insulation material with aluminum foil	Product Features PC Insulating Materials Item NO.: BN-FP ROHS Compliant: Yes UL Recognized: Yes Features and Benefits Polycarbonate Color--Blac...
	Black color UL94 v-0/VTM-0 Flame resistant insulation material	Product Features PC Insulating Materials Item NO.: BN-FP ROHS Compliant: Yes UL Recognized: Yes Features and Benefits Polycarbonate Color--Blac...

Похожие товары

	Foil Surface Pipe Insulation	Продавец: Langfang Clear Chemical Building Materials Co., Ltd	When it comes to choosinghigh-performance insulation for pipesin commercial, industrial, or resid...
	Phenolic Foam Ductwork	Продавец: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic foam ductworkis a lightweight duct system that combines phenolic foam's excellent insula...
	Pre-insulated Phenolic Duct Board	Продавец: Langfang Clear Chemical Building Materials Co., Ltd	Pre-insulated phenolic duct boardis a next-generation HVAC ducting solution that combines thermal...
	YCS S-550A Утолщенная изоляционная прокладка увеличенного размера для лужения	Продавец: Phonefix	Описание Силиконовый коврик YCS Tin-planted ARC Pad с пазом 0,4 мм 0,5 мм 0,8 мм для ремонта пайк...
	Phenolic Paper Laminated Sheet	Продавец: Xuchang Yongteng Insulation Material Co., Ltd	The product is made of an insulating impregnated paper soaked with phenolic resin, through baking...