waterproof Single-component thermal Silicone sealant for LED lighting application
All supplier products
Product Features
Features：
One component adhesive/sealant
Cures at room temperature when exposed to moisture in the air.
Alkoxy cure system,
Non-sag, paste consistency
UL94 V-0
RoHs Compliance: Yes
Applications:
Sealing lids and housings
General sealing and component protection
Processing
All surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methyl ethyl ketone. Good unprimed adhesion may be obtained on a variety of substrates, including enameled and painted steel, aluminum, ceramics, glass and certain plastics. Substrates to which good adhesion is normally not obtained include PTFE, PE, PP and related materials. Apply a bead of BN-RT200 H Adhesive/ Sealant to one of the prepared surface, and then quickly cover with the substrate to be bonded. Very deep sections, will take longer to cure completely.
Cure time
After skin formation， cure continues inward from the surface. Cure time is extended at lower humidity levels. Before handling and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by the user for each specific application.
Packaging
100g/blister, 300ml cartridge.
Usable life and storage
BN-RT200 H has a shelf life of 12 months from the date of manufacture when stored at or below 30℃ in the original un opened containers.
Send product request
Other supplier products
 |
hot-pressing and injecting silicone headphone rubber cover | It's adopts high performance silicon rubber as the raw material,it's adopting hot-pressing and injection method molding, meanwhile it can provide c... |
 |
BMC material electrical insulator/ thermal insulater/ Pin insulator | Product Features Insulator Item NO.: JYZ series RoHs compliance: Yes Benefits Excellent compressive property: 10KV/mm Excellent tensile property:&... |
 |
one side or two side adhesive silicone sheet for CPU cooler | ROHS Compliant: Yes UL recognized: Yes Features and Benefits: Thermal conductivity: 1.0-8.0 W/m·K Excellent thermal performance Low oil-blee... |
 |
High performance Thermal conductive Silicone seal ring | The conductive material products are based on thermal uniform temperature raw material,adopt aluminum foil or carbon fiber etc.,In order to make th... |
 |
Thermal conductive Electroni Insulation Thermal Pad for heatsink | ROHS Compliant: Yes UL recognized: Yes Features and Benefits: Thermal conductivity: 1.0-8.0 W/m·K Excellent thermal performance Low oil-blee... |
Same products
 |
Foil Surface Pipe Insulation | Seller: Langfang Clear Chemical Building Materials Co., Ltd | When it comes to choosinghigh-performance insulation for pipesin commercial, industrial, or resid... |
 |
Phenolic Foam Ductwork | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic foam ductworkis a lightweight duct system that combines phenolic foam's excellent insula... |
 |
Pre-insulated Phenolic Duct Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Pre-insulated phenolic duct boardis a next-generation HVAC ducting solution that combines thermal... |
 |
YCS S-550A Oversized Thickened Insulation Pad for Tin Plating | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description YCS Tin-planted ARC Pad Silicone Mat with 0.4mm 0.5mm 0.8mm Slot for mobile ... |
 |
Phenolic Paper Laminated Sheet | Seller: Xuchang Yongteng Insulation Material Co., Ltd | The product is made of an insulating impregnated paper soaked with phenolic resin, through baking... |
