Adapter Charger Housing Mold 496-1

Mould Name: Adapter Charger Housing Mould

Part Material: PC

Product Size: 58.3*57.9*8.6mm

Product Description: Adapter Charger Housing UK

Mould Cavity: 4 Cavities

Mould Size: 400*450*343MM

Suitable Injection Machine: 160 ton

Mould Cavity Steel: ASSAB8407

Mould Injection System: Cold runner w/ tunnel gate

Mould Ejection System: Ejector Pin

Mould Cycle Time: 26's

Mould Life Cycle: 500,000

Lead Time: 60 days

Mould Features: 8 Sliders

Adapter mold is also AC charger mold, HanKing has made a lot of such moulds. For the adapter mold or AC charger mould, the appearance is important as well as the part dimension.

What issues should be noted in the tooling design?

First, we should choose the parting line of the part, parting line in cavity side, and parting line in the core side and it's very important to get customers' approval for the parting line.

The mold designer must choose the appropriate gate position and diameter of the gate according to the structure of the product and the requirements of the clients. For this charger mould, we normally suggest using point gate.

How to release the plastic adapter from the mould also requires careful consideration by the designer. Designers must carefully study the structure of the product, using sliders, lifters and ejection mechanisms to help the product smoothly get out of the mold cavity.

Manufacturing tips: shut-off angle along the slider moving direction as well as polishing the steel along the direction of product removal.

When some areas make the mould ejection out difficulty, find out the solution and send a proposal to the customer.

Try to make insert in the complicate area and to confirm the split line of insert pin with customers.

Reasonable use of ejector pin, ejector sleeve, ejector blade, etc. mechanisms, the distribution of the ejector pin should be even and balance.

The texture and polish are different in the cavity and core of the mould.

Most of the time, the plastic part drawing from the customer is not designed with a draft angle, we should propose to increase the draft angle within the allowable range.

It should be recessed on the bottom surface to avoid sink mark because of the wall thickness of the pillars.

The designer should check if any ribs or holes are not able to put ejector pin.

Sharp steel is must be avoided.

As the ac mould engineering limited, HanKing Mould has excellent experience in Adapter Charger Mould, we made Adapter Mould for different country standard, good water cooling to get the beautiful part surface, and automatic ejection.

Following the concept of customer first, hanking molddedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.

We are a responsible china plastic injection mold makerand chinese injection molding companiesand have experience in supplying custom plastic injection molding service for many years. Our production sites have been accredited the certification of TS16949, ISO 14001 and ISO 9001, etc. You can fully trust our production sites, products and place your orders.

Другие товары поставщика

	2k Injection Mold	2k mouldspecification Part function: Water plastic manifold Part material: PP & TPE Shrinkage: 1.6% Cavity: 1 cavity Mould base: 1.1730 A...
	Plastic Injection Moulds	We have injection molding molds for sale! At present, more than 90% of plastic products in our daily life are injection molded. The market prospect...
	Home Appliance Molding Parts	Household Appliances Mould Parts High Gloss Plastic Finish Parts High gloss polish finishing plastic injection molded parts The part is thin and ...
	Home Appliance Mould	HanKing Mould Enginering Ltd.offer various products to meet people’s needs, including home appliance mold. Embroidery Machine Frame Mould Pl...
	3 Plate Mould 49113-21.	Mould Name: 3 Plate Insert Mould/ 3 plate injection mold Part Material: PBT GF15 Product Size: ф34.9x82.29 Product Description: Mischschraube kpl...

Все товары поставщика

Похожие товары

	T60404-N4646-X400	Продавец: 双为（香港）科技有限公司	Датчик тока для монтажа на плату Датчик тока 25A 3 контакта +/-15В Атрибуты продукта Значение ат...
	Hangzhi CAFR-A-NP Series PCB Current sensor	Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd	Серия CAFR-A-NP — это датчик тока, разработанный Hangzhi, который можно припаять к печатной...
	Hangzhi CIT High Precision Split Core current transducer	Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd	Высокоточный преобразователь тока с разъемным сердечником серии CIT разработан компанией Hangzhi ...
	BMS300 Automotive Current Sensor Transducer	Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd	BMS300 феррозондовый преобразователь состоит из возбуждающего магнитного кольца и схемы управлени...
	AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm	Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd	AIT6000-SG имеет высокий коэффициент усиления и точность измерения во всем диапазоне полосы пропу...