Adapter Charger Housing Mold 496-1
Mould Name: Adapter Charger Housing Mould
Part Material: PC
Product Size: 58.3*57.9*8.6mm
Product Description: Adapter Charger Housing UK
Mould Cavity: 4 Cavities
Mould Size: 400*450*343MM
Suitable Injection Machine: 160 ton
Mould Cavity Steel: ASSAB8407
Mould Injection System: Cold runner w/ tunnel gate
Mould Ejection System: Ejector Pin
Mould Cycle Time: 26's
Mould Life Cycle: 500,000
Lead Time: 60 days
Mould Features: 8 Sliders
Adapter mold is also AC charger mold, HanKing has made a lot of such moulds. For the adapter mold or AC charger mould, the appearance is important as well as the part dimension.
What issues should be noted in the tooling design?
First, we should choose the parting line of the part, parting line in cavity side, and parting line in the core side and it's very important to get customers' approval for the parting line.
The mold designer must choose the appropriate gate position and diameter of the gate according to the structure of the product and the requirements of the clients. For this charger mould, we normally suggest using point gate.
How to release the plastic adapter from the mould also requires careful consideration by the designer. Designers must carefully study the structure of the product, using sliders, lifters and ejection mechanisms to help the product smoothly get out of the mold cavity.
Manufacturing tips: shut-off angle along the slider moving direction as well as polishing the steel along the direction of product removal.
When some areas make the mould ejection out difficulty, find out the solution and send a proposal to the customer.
Try to make insert in the complicate area and to confirm the split line of insert pin with customers.
Reasonable use of ejector pin, ejector sleeve, ejector blade, etc. mechanisms, the distribution of the ejector pin should be even and balance.
The texture and polish are different in the cavity and core of the mould.
Most of the time, the plastic part drawing from the customer is not designed with a draft angle, we should propose to increase the draft angle within the allowable range.
It should be recessed on the bottom surface to avoid sink mark because of the wall thickness of the pillars.
The designer should check if any ribs or holes are not able to put ejector pin.
Sharp steel is must be avoided.
As the ac mould engineering limited, HanKing Mould has excellent experience in Adapter Charger Mould, we made Adapter Mould for different country standard, good water cooling to get the beautiful part surface, and automatic ejection.
Following the concept of customer first, hanking molddedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.
We are a responsible china plastic injection mold makerand chinese injection molding companiesand have experience in supplying custom plastic injection molding service for many years. Our production sites have been accredited the certification of TS16949, ISO 14001 and ISO 9001, etc. You can fully trust our production sites, products and place your orders.
Send product request
Other supplier products
 |
Plastic Insert Mold | Plastic Insert Mold 139-86 Mould Name: Plastic Insert Mold Part Material: PA + Glassfiber Product Size: 11*30*1.3 Product Description: St... |
 |
Precision Mould | How to build a high precision mould? We have been manufacturing plastic precision moulds for more than ten years. With our expertise and experien... |
 |
Consumer Parts Plastic Mold | Description: Plastic Valve 3 Plate Mould Tolerance: +-0.01mm Surface: SPI A2 & VDI 3400 Part material: PPO food grade Shrinkage: 0.... |
 |
Multi Cavity Mould | A multi-cavity mouldcan be understood, obviously referring to mold with multiple cavities. The multi-cavity mold comprises a multi-cavity of the sa... |
 |
Insert Molding Technologies for Automotive Industry | Insert Molding Technologiesfor Automotive Industry Mould Type: Automotive Sensor Plastic Injection Mould Production Material: Nylon PA66 No ... |
Same products
 |
China factory power amplifier EEA-PAM-581-D32-EN3 DEA-JSGF320-2020 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory power amplifier EEA-PAM-581-D32-EN3 DEA-JSGF320-2020 for power station Deyang YOYI... |
 |
China made Photoelectric converter EMC-02 for power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | ""China made Photoelectric converter EMC-02 for power plant is an exclusive product for power uni... |
 |
China factory throttling device F289S-K0109B-19 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory throttling device F289S-K0109B-19 for power station Deyang YOYIK have power plant ... |
 |
"China factory heater HOPPER for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory heater HOPPER for power station Yoyik is specialized in manufacturing and providin... |
 |
China factory Float level switch UQK-01-FYK for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Float level switch UQK-01-FYK for power station Our company mainly serves thermal ... |
