PIR Sensor Module

• 

Owning very strong R&D Center, Senba can research and develop the passive infrared sensorindependently. Among those chinese pirsensor manufacturers, Senba Sensorhas become the first owner of this special technology enterprise in China. We are awarded as "Henan high-tech enterprises" in 2006 and awarded as "Notional high-tech enterprises" in 2012.

Pyroelectric sensor is a kind of sensor, also known as human body infrared sensor, used for life burglar alarm, visitor notification, etc., the pir sensor working principleis to release the charge through the amplifier into a voltage output.Senbaoffers a wide range of PIR Sensor Module products including human motion sensor module, infrared pir motion sensor module, pir motion detector moduleand so on.

The piezoelectric ceramic dielectric can maintain a polarization state after being polarized, which is called spontaneous polarization. Spontaneous polarization decreases with increasing temperature and the temperature drops to zero at the Curie point. Therefore, when the material is exposed to infrared radiation and the temperature rises, the surface charge will decrease, which is equivalent to releasing a part of the charge, so it is called pyroelectric. The discharged charge is converted to a voltage output by an amplifier. This is how the pyroelectric infrared pir motion sensor detector moduleworks.

When the radiation continues to act on the pyroelectric element and its surface charge is balanced, the charge is no longer released. Therefore, the human sensor module pyroelectric infraredcannot detect constant infrared radiation.

Pyroelectric sensor working principle: The human body has a constant body temperature, generally at 37 degrees, so it will emit infrared rays with a specific wavelength of about 10UM. Passive infrared probes work by detecting infrared rays of about 10UM emitted by the human body. The 10 UM infrared rays emitted by the human body are enhanced by the Philippine filter and collected on the infrared sensing source. The infrared sensing source usually adopts a pyroelectric element, which loses the charge balance when receiving the temperature change of the infrared radiation of the human body, and discharges the charge outward, and the subsequent circuit can generate an alarm signal after being detected and processed.

Pyroelectric effect: When some crystals are heated, an equal number of oppositely charged charges will be produced across the crystal. This phenomenon of polarization due to thermal changes is called pyroelectric effect.

Fresnel lens: According to the Fresnel principle, the Fresnel lens is divided into two types: refractive and reflective. Its role is to focus and refract (reflect) the pyroelectric infrared signal on the PIR. Second, the detection area is divided into a number of bright areas and dark areas, so that moving objects entering the detection area can produce a modified pyroelectric infrared signal on the PIR in the form of temperature changes, so that the PIR can generate a change electrical signal. The sensitivity of the pyroelectric human infrared sensor moduleis greatly increased.

FAQ

Is Wave Soldering Recommended?

Wave soldering is likely to cause degradation of product performance. Wave soldering is not recommended. Generally we recommend to solder by hand.

Can PIR Sensor Detect Animals?

PIR sensors are excellent in human and animal detection. They are mostly used in triggering an intruder alarm and activate household appliances upon the presence of a human.

Do PIR Sensors Work Through Glass?

No, alarm motion sensors do not work through glass. Most motion sensors use passive infrared (PIR) technology to detect motion. Changes in IR energy are not easily detected through glass. This is why motion sensors will generally not work through windows, which are usually insulated.

What Is The Package?

What are the Factors that Affect the Performance of the Product?

Другие товары поставщика

	LDR Photoresistors	Light dependent resistor is made of semi conductor material, and the conductance changs with light. According to this characteristic, LDR photoresi...
	Low Differential Pressure Transmitter/Transducer	Low Differential Pressure Transmitter For measuring very small pressure differences between two measurement points either side of a ventilation fan...
	Fast Response Light Dependent Resistor φ10 Series for Light Switch	Featureof light sensitive resistor Coated with epoxy Good reliability Small volume Good spectrum characteristic Standard Type and Specifications ...
	3Pins Electronic Components PIR BL312 From Senba Factory	Senba Sensing Technology Co.,Ltd. is a professional china sensor manufacturer. We provide Infrared Thermopile Sensor, Digital PIR Sensor, passive i...
	Analog Output 3- 15V Passive Infrared Sensor D204B	Overview of pir sensor d204b D204B come standard with enhanced immunity to EMI (Electro-Magnetic Interference). It widely used in security system. ...

Похожие товары

	China factory Signal control board DK-MCJ3004 for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China factory Signal control board DK-MCJ3004 for power station Sold by YOYIK. Deyang YOYIK is a...
	Made in China Signal board 6ES7288-5CM01-0AA0 for thermal power plant	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Signal board 6ES7288-5CM01-0AA0 for thermal power plant Selection of advanced tech...
	China made Small machine dual LVDT sensor TDZ-1 for power plant	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China made Small machine dual LVDT sensor TDZ-1 for power plant Deyang YOYIK is a strong technic...
	Linear displacement sensor 181.36.06.G02 power plant	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China supplier Linear displacement sensor 181.36.06.G02 power plant spare parts Main: hydraulic ...
	China factory Limit switch DE Ll LX918-11L for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	China factory Limit switch DE Ll LX918-11L for power station YOYIK is a research and development,...