PIR Sensor Module
Owning very strong R&D Center, Senba can research and develop the passive infrared sensorindependently. Among those chinese pirsensor manufacturers, Senba Sensorhas become the first owner of this special technology enterprise in China. We are awarded as "Henan high-tech enterprises" in 2006 and awarded as "Notional high-tech enterprises" in 2012.
Pyroelectric sensor is a kind of sensor, also known as human body infrared sensor, used for life burglar alarm, visitor notification, etc., the pir sensor working principleis to release the charge through the amplifier into a voltage output.Senbaoffers a wide range of PIR Sensor Module products including human motion sensor module, infrared pir motion sensor module, pir motion detector moduleand so on.
The piezoelectric ceramic dielectric can maintain a polarization state after being polarized, which is called spontaneous polarization. Spontaneous polarization decreases with increasing temperature and the temperature drops to zero at the Curie point. Therefore, when the material is exposed to infrared radiation and the temperature rises, the surface charge will decrease, which is equivalent to releasing a part of the charge, so it is called pyroelectric. The discharged charge is converted to a voltage output by an amplifier. This is how the pyroelectric infrared pir motion sensor detector moduleworks.
When the radiation continues to act on the pyroelectric element and its surface charge is balanced, the charge is no longer released. Therefore, the human sensor module pyroelectric infraredcannot detect constant infrared radiation.
Pyroelectric sensor working principle: The human body has a constant body temperature, generally at 37 degrees, so it will emit infrared rays with a specific wavelength of about 10UM. Passive infrared probes work by detecting infrared rays of about 10UM emitted by the human body. The 10 UM infrared rays emitted by the human body are enhanced by the Philippine filter and collected on the infrared sensing source. The infrared sensing source usually adopts a pyroelectric element, which loses the charge balance when receiving the temperature change of the infrared radiation of the human body, and discharges the charge outward, and the subsequent circuit can generate an alarm signal after being detected and processed.
Pyroelectric effect: When some crystals are heated, an equal number of oppositely charged charges will be produced across the crystal. This phenomenon of polarization due to thermal changes is called pyroelectric effect.
Fresnel lens: According to the Fresnel principle, the Fresnel lens is divided into two types: refractive and reflective. Its role is to focus and refract (reflect) the pyroelectric infrared signal on the PIR. Second, the detection area is divided into a number of bright areas and dark areas, so that moving objects entering the detection area can produce a modified pyroelectric infrared signal on the PIR in the form of temperature changes, so that the PIR can generate a change electrical signal. The sensitivity of the pyroelectric human infrared sensor moduleis greatly increased.
FAQ
Is Wave Soldering Recommended?
Wave soldering is likely to cause degradation of product performance. Wave soldering is not recommended. Generally we recommend to solder by hand.
Can PIR Sensor Detect Animals?
PIR sensors are excellent in human and animal detection. They are mostly used in triggering an intruder alarm and activate household appliances upon the presence of a human.
Do PIR Sensors Work Through Glass?
No, alarm motion sensors do not work through glass. Most motion sensors use passive infrared (PIR) technology to detect motion. Changes in IR energy are not easily detected through glass. This is why motion sensors will generally not work through windows, which are usually insulated.
What Is The Package?
What are the Factors that Affect the Performance of the Product?
Send product request
Other supplier products
 |
Fast Response Light Dependent Resistor φ10 Series for Light Switch | Overview of photosensitive resistance A photoelectric device can be either intrinsic or extrinsic. An intrinsic semiconductor has its own charge ca... |
 |
Dual Elements Passive Infrared Sensor Used for Alarm System D203B | Overview D203B(dualtech detector)with big angle windows. It widely used in light sensor.Dual compensated sensing elements are applied to suppress ... |
 |
Low Distortion Coupling Linear Optocoupler LCR - 0203 Series for Volume Control and Electrical Coupling | Overview Optocoupler is an electronic component that transfers electrical signals between two isolated circuits by using light. It is widle used i... |
 |
Digital PIR Sensor | What ispir sensor digital? Specifications ofpyroelectric passive infrared sensor Output Type Number Of Elements Model Window Size (MM) ... |
 |
LDR Photoresistors | Light dependent resistor is made of semi conductor material, and the conductance changs with light. According to this characteristic, LDR photoresi... |
Same products
 |
AIT500-SG High-Precision Current Sensor Transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT500-SG has a high gain and measurement accuracy in the full bandwidth range, due to theapplica... |
 |
JWA2-M Oil Micro Moisture Sensor | Seller: Shenzhen Joinwe Smart Co.,Ltd | JWA2-M micro moisture sensorcan quickly and accurately detect oil water activity (moisture satura... |
 |
Made in China Displacement sensor 4000TDG for thermal power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Displacement sensor 4000TDG for thermal power plant YOYIK professional production ... |
 |
China made Control System LVDT 5000TDGN for power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Control System LVDT 5000TDGN for power plant Dongfang Yoyik has advanced technology a... |
 |
China supplier main control board APF7.820.117A-A power plant spare parts | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier main control board APF7.820.117A-A power plant spare parts Dongfang Yoyik is spec... |
