CCTV Compression Tool For Waterproof Connectors (T5008)
CCTV Compression Tool for Waterproof Connectors (T5008)Description:The compression tool T5008 is for compressing waterproof connectors. It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.Instructions:Step 1:1. Trim back the outer jacket approximately 1/2"2. Trim the braided wire to approximately 1/4" length and fold it back over the outer jacket3. Remove approximately 1/4" from the dielectric. This should leave approximately 1/4" of center conductor exposed and 1/4" of the dielectric exposed. Please review the diagram as shown.Step 2:Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.Step 3:Place the connector with cable into the tool’s holder.Step 4:Squeeze the handles.Step 5:Remove the compressed connector from the tool.For example, it can be used for our F connector model No.CT5083/RG59.Size: 215*52*20mm(L*W*H)Net Weight: 450g(490g including blister packing)
Другие товары поставщика
|
|
|
Coaxial Type F Female to F Male Right Angle Adapter/Connector CT5074ZDescription:F Female to F Male Right Angle Connector/AdapterCoaxial Type F (Fe... |
|
|
|
RG59 Black silicone rubber boot for Crimping ConnectorsDescription:This slip on molded strain relief boot is designed to be used on RG59 or RG62 st... |
|
|
|
1ch CCTV Waterproof UTP Passive Video Balun(VB100W)Description:The CCTV Waterproof UTP Passive Video Balun VB100W is a passive transmission device ... |
|
|
|
2 Port RJ45 + 1 Port SC Fiber Network Switch (SW0201SC)Description:SW0201SC is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, an... |
|
|
|
Description:4FE POE+1FE+1SC. Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab. Comply to POE IEEE 802.3af/at standard, all ports standard testing. S... |
Все товары поставщика
Похожие товары
