CCTV Compression Tool For Waterproof Connectors (T5008)
CCTV Compression Tool for Waterproof Connectors (T5008)Description:The compression tool T5008 is for compressing waterproof connectors. It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.Instructions:Step 1:1. Trim back the outer jacket approximately 1/2"2. Trim the braided wire to approximately 1/4" length and fold it back over the outer jacket3. Remove approximately 1/4" from the dielectric. This should leave approximately 1/4" of center conductor exposed and 1/4" of the dielectric exposed. Please review the diagram as shown.Step 2:Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.Step 3:Place the connector with cable into the tool’s holder.Step 4:Squeeze the handles.Step 5:Remove the compressed connector from the tool.For example, it can be used for our F connector model No.CT5083/RG59.Size: 215*52*20mm(L*W*H)Net Weight: 450g(490g including blister packing)
Other supplier products
|
|
|
RG59 Black silicone rubber boot for Crimping ConnectorsDescription:This slip on molded strain relief boot is designed to be used on RG59 or RG62 st... |
|
|
|
10/100Mbps Gigabit Uplink Switch With 16 Port POE (POE1622GH),POE Switch |
|
|
|
Cat5 Power Video Data Balun with AC/DC Voltage Converter (PVDC23)Description:Power-Video-Audio/Date signals are routed via UTP and RJ45. The unit i... |
|
|
|
DC Power Cable For CCTV Security Cameras (CT5088), DC Power Splitter |
|
|
|
4ch Acitve CCTV UTP Video Balun for CCTV System (VB411R)Description:The VB411R active video receiver receives balanced signal to converts it into u... |
供应产品
Same products
