Ultraviolet Aging Testing Chamber

Equipment Description

This test equipment is designed to simulate the sunlight and cause the damage of the sun's ultraviolet light, by exposing the material under a controlled high temperature to test the material for weathering. It uses UV lamps to simulate the radiation effect of sunlight and simulates dew and rain through condensation and water spray. In just a few days or weeks, the UV irradiation equipment can reproduce the damage that takes months or even years to occur outdoors, including fading, color change, loss of gloss, chalking, cracking, crazing, wrinkling, blistering, brittleness, strength reduction, oxidation, etc. The test results can be used to select new materials, improve existing materials, or evaluate changes in material formulations.

Product introduction

Product Name: Ultraviolet Aging Testing Chamber

Product style: STD-UV-1140

Sample Restrictions.

Equipment prohibits:

Test and storage of flammable, explosive, volatile substances specimens

Testing and storage of corrosive substances

Testing or storage of biological specimens

Testing and storage of specimens of strong electromagnetic emission sources

Technical specifications

standards

The installation and wiring of the electrical part of the equipment is carried out in accordance with international electrical standards.

Perfect professional after-sales service.

GB/T14552-2008 "National Standard of the People's Republic of China - Plastic, coating and rubber materials for mechanical industrial products - Accelerated test method for artificial climate" a. Fluorescent UV/condensation test method.

GB/T16422.3-1997 GB/T16585-96 Related analytical methods.

GB/T16585-1996 National Standard of the People's Republic of China-Vulcanized Rubber Artificial Climate Aging (Fluorescent UV Lamp) Test Method.

GB/T16422.3-1997 "Plastic Laboratory Light Source Exposure Test Method" and other corresponding standard clauses design and manufacturing standards.

Comply with international test standards: ASTM D4329. ISO 4892-3. ISO 11507. SAE J2020 and other current UV aging test standards.

Other kinds of standards are not exhaustively listed, if necessary, please confirm with our technical department.

Volum and size

Studio size(mm):1130×550×400(D*W*H)

Packing size around(mm):1340×1250×1560 (D*W*H)

The irradiance control system.

Irradiation enabled when using UVA-340 lamps (UVA-340)

UVA-340 irradiance range: 0.45 ~ 2W/m2 adjustable

Extend the life of the lamp

UV lamp parameters.

Lamp type: standard UVA-340 (315-400nm) with 8 lamps

Lamp center distance: 70mm

The distance between the center of the test article and the lamp: 50±3mm

Irradiation intensity: according to the set light intensity output

Temperature and humidity indicators.

Temperature range: room temperature +10～70℃ adjustable

Humidity range:≥95%RH

Temperature fluctuation: ±3℃

Temperature resolution: 0.1℃

Blackboard thermometer.

Measuring range: 45～70℃

Tolerance: ±3℃

Temperature control mode

Comprehensive and detailed real-time monitoring and curve recording can be provided for irradiance, temperature, time and other important test parameters (controller with paperless recorder function), and reports and curve printing can be generated through the computer.

Irradiation/condensation/water spray test can be carried out separately, and any combination of irradiation/condensation/water spray test can be programmed.

Provide life reference for imported UV lamps with expensive materials (the lamps are consumables with a life span of about 1600 hours), so that users can easily confirm the replacement time of the lamps and save the cost of use. Through irradiance measurement and control device (by adjusting the voltage), irradiance can be measured and controlled, so that the irradiance is automatically stabilized at the set value, and the service life of the lamp is greatly extended..

Automated water supply and drainage design with high cost and high power water mercury to ensure the flow rate and uniformity of water spraying.

Most of the main components are made of international brands, and a small part is made of Chinese brands, which improves the safety and reliability of the products. (For details, please refer to the attached main parts list.)

Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.

Другие товары поставщика

	Friction and wear testing machine	Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T 1865-2009 Application field Petrochemical: Used to ass...
	Suitcases Vibration Impact Tester	Product Introduction: This machine is used to test the shock resistance of various luggage handles, car stitches and overall structure. The method...
	Safety Helmets Against Molten Metal Splashing Tester	Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (Draft Standard) GB 2811-2019: Head Protection – G...
	Abrasive Wear Testing Machine	Abrasive wear testing machines are mainly used to evaluate the surface wear performance of materials. They conduct abrasive wear tests on materials...
	Environmental Stress Cracking Resistance Tester	This instrument is a testing device recommended according to standard requirements. It is a specialized device designed specifically for environmen...

Все товары поставщика

Похожие товары

	UV Accelerated Weathering Tester丨UV Accelerated Weathering Chamber	Продавец: Standard International Group (HK) Limited	Standard ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 1297 、EN ...
	UV Condensation Aging Test Chamber丨UV Condensation Aging Tester	Продавец: Standard International Group (HK) Limited	Standard ASTM G154.ISO 4892-3.JIS K 7350. andSAE J2020for UV exposure testing. IEC 60068-2-78fo...
	UV Aging Test Chamber丨UV Aging Test Mechine	Продавец: Standard International Group (HK) Limited	The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resistance, ...
	UV Light Degradation Chamber丨UV Light Degradation Tester	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.TheUVlamps can be selected in different wavelength ranges, including U...
	Weatherometer Laboratory Testing Equipment(UV)	Продавец: Standard International Group (HK) Limited	Features and Benefits 1. UVA-340. UVB-313 and other UV lamps, a single power of 40 watts, can ...