Ultraviolet Aging Testing Chamber
Equipment Description
This test equipment is designed to simulate the sunlight and cause the damage of the sun's ultraviolet light, by exposing the material under a controlled high temperature to test the material for weathering. It uses UV lamps to simulate the radiation effect of sunlight and simulates dew and rain through condensation and water spray. In just a few days or weeks, the UV irradiation equipment can reproduce the damage that takes months or even years to occur outdoors, including fading, color change, loss of gloss, chalking, cracking, crazing, wrinkling, blistering, brittleness, strength reduction, oxidation, etc. The test results can be used to select new materials, improve existing materials, or evaluate changes in material formulations.
Product introduction
Product Name: Ultraviolet Aging Testing Chamber
Product style: STD-UV-1140
Sample Restrictions.
Equipment prohibits:
Test and storage of flammable, explosive, volatile substances specimens
Testing and storage of corrosive substances
Testing or storage of biological specimens
Testing and storage of specimens of strong electromagnetic emission sources
Technical specifications
standards
The installation and wiring of the electrical part of the equipment is carried out in accordance with international electrical standards.
Perfect professional after-sales service.
GB/T14552-2008 "National Standard of the People's Republic of China - Plastic, coating and rubber materials for mechanical industrial products - Accelerated test method for artificial climate" a. Fluorescent UV/condensation test method.
GB/T16422.3-1997 GB/T16585-96 Related analytical methods.
GB/T16585-1996 National Standard of the People's Republic of China-Vulcanized Rubber Artificial Climate Aging (Fluorescent UV Lamp) Test Method.
GB/T16422.3-1997 "Plastic Laboratory Light Source Exposure Test Method" and other corresponding standard clauses design and manufacturing standards.
Comply with international test standards: ASTM D4329. ISO 4892-3. ISO 11507. SAE J2020 and other current UV aging test standards.
Other kinds of standards are not exhaustively listed, if necessary, please confirm with our technical department.
Volum and size
Studio size(mm):1130×550×400(D*W*H)
Packing size around(mm):1340×1250×1560 (D*W*H)
The irradiance control system.
Irradiation enabled when using UVA-340 lamps (UVA-340)
UVA-340 irradiance range: 0.45 ~ 2W/m2 adjustable
Extend the life of the lamp
UV lamp parameters.
Lamp type: standard UVA-340 (315-400nm) with 8 lamps
Lamp center distance: 70mm
The distance between the center of the test article and the lamp: 50±3mm
Irradiation intensity: according to the set light intensity output
Temperature and humidity indicators.
Temperature range: room temperature +10～70℃ adjustable
Humidity range:≥95%RH
Temperature fluctuation: ±3℃
Temperature resolution: 0.1℃
Blackboard thermometer.
Measuring range: 45～70℃
Tolerance: ±3℃
Temperature control mode
Comprehensive and detailed real-time monitoring and curve recording can be provided for irradiance, temperature, time and other important test parameters (controller with paperless recorder function), and reports and curve printing can be generated through the computer.
Irradiation/condensation/water spray test can be carried out separately, and any combination of irradiation/condensation/water spray test can be programmed.
Provide life reference for imported UV lamps with expensive materials (the lamps are consumables with a life span of about 1600 hours), so that users can easily confirm the replacement time of the lamps and save the cost of use. Through irradiance measurement and control device (by adjusting the voltage), irradiance can be measured and controlled, so that the irradiance is automatically stabilized at the set value, and the service life of the lamp is greatly extended..
Automated water supply and drainage design with high cost and high power water mercury to ensure the flow rate and uniformity of water spraying.
Most of the main components are made of international brands, and a small part is made of Chinese brands, which improves the safety and reliability of the products. (For details, please refer to the attached main parts list.)
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
在线联系供应商
Other supplier products
 |
Syringe slide performance tester | The Syringe Slide Performance Tester is a specialized instrument designed to measure the push and pull forces of syringe plungers, ensuring smooth ... |
 |
In-situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
 |
Building material flame retardancy test furnace | Technical parameters Gas used: methane flow rate (35 ± 0.5)L/min, its purity is greater than 95%, air flow rate (17±0.2)L/min Speci... |
 |
Photovoltaic module outdoor exposure test system | The Photovoltaic Module Outdoor Exposure Test System is designed to simulate real-world environmental conditions for accelerated aging and performa... |
 |
Photovoltaic module backplane peeling strength testing machine | The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialized device designed to evaluate the peeling strength of photovoltai... |
Same products
 |
UV Accelerated Weathering Tester丨UV Accelerated Weathering Chamber | 卖方: Standard International Group (HK) Limited | Standard ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 1297 、EN ... |
 |
UV Condensation Aging Test Chamber丨UV Condensation Aging Tester | 卖方: Standard International Group (HK) Limited | Standard ASTM G154.ISO 4892-3.JIS K 7350. andSAE J2020for UV exposure testing. IEC 60068-2-78fo... |
 |
UV Aging Test Chamber丨UV Aging Test Mechine | 卖方: Standard International Group (HK) Limited | The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resistance, ... |
 |
UV Light Degradation Chamber丨UV Light Degradation Tester | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.TheUVlamps can be selected in different wavelength ranges, including U... |
 |
Weatherometer Laboratory Testing Equipment(UV) | 卖方: Standard International Group (HK) Limited | Features and Benefits 1. UVA-340. UVB-313 and other UV lamps, a single power of 40 watts, can ... |
