METAL HEMMING
Metal hemming is a process that involves folding the edge of the sheet metal to 180° onto itself. Then, two newly formed layers are flush with each other. Many automotive parts are produced by metal hemming, such as trunk lids, deck lids, hoods, tailgates and doors. There are 4 types of metal hemming: teardrop hem, closed hem, open hem and rolled hem. The closed hem is the most popular one as the process is simple. It is totally flush. However, it has material limitations, including thickness and angle limitations to avoid fracture.
WHAT IS THE PURPOSE OF METAL HEMMING?
Generally, metal forming is used to connect parts together to achieve a better appearance and strengthen the edges of parts.
HOW TO HEM MATERIAL WITH LOW FLEXIBILITY?
For some material such as aluminum, the closed hem is not an ideal choice, since the flexibility them are not enough and they are easy to break during the process. Instead, teardrop hem is the best choice for this material. It is a flange which is bent over more than 180°with only marginal inside radius change, and that is the reason why it can process that low-ductility without fracture.
WHAT IS THE DIFFERENCE BETWEEN METAL HEMMING AND METAL SEAMING?
Hemming and seaming are two very similar metal processing servicethat both involve bending metal over onto itself. The difference is that seaming is to use a seam to join two layers of metal sheet together and two layers are not flush with each other while on the other hand two layers are flush with each other with hemming.
As one of metalworking suppliers, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
CAR GLASS LIFTER | The commonly used car glass lifteris composed of motor, reducer, guide rope, guide plate, glass mounting bracket, etc. It is a lifting device for a... |
 |
METAL PUNCHING | Metal punching serviceis a key part of Hunkmachining's services, mostly applied to automobile parts. We offer the service whether for aluminum, sta... |
 |
MOVER SEAT MOUNT | lawn mower seat bracketsis set into the seat of the mower in order to support the seat against the weight and pressure from the driver. What we are... |
 |
METAL FLANGING | Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It... |
 |
AUTOMOTIVE PARTS | There are tremendous metal stamping parts you can find on a car. From a small clip to the entire body frame, the production of a car is always stro... |
