KU/ KUT 2-Jaw /3-Jaw Slant-Column Pull Back Draw Down Solid Power Chuck for end positioning
(1). KU/KUT solid slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parallelism of the end surface. It only needs to change the clamps when different workpieces are installed.
(2). When processing different workpieces, only need to change the soft jaws to use.
(3).Centrifugal force compensation.
(4). Less maintenance, lower wear, long-term stable accuracy, constant clamping force.
(5). Repeat positioning accuracy up to: 0.025mm.
(6). Chuck diameter range: 110-381 mm, 4 to 15 inch
(7). Material: Steel.
(8). Clamp and pull back the workpiece, with a strong clamping force.
Другие товары поставщика
|
|
BD 3-Jaw Large Through-Hole Hollow Hydraulic Power Chuck For Thick Bar |
(1). BD 3-jaw large through-hole hollow hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 size. (2). Clamping force is large, long stroke achieve la... |
|
|
LU 3-Jaw Inner-Cylinder Slant-Column Hydraulic Pneumatic Combination Mounting Chuck Fixture for O.D. |
(1). Oblique column design provides a high precision and strong clamping force for processing. (2) . For drilling, milling machines, tapping machin... |
|
|
KL/KLT/KLH 2-Jaw / 3-Jaw / 4-Jaw Long Stroke Solid Hydraulic Power Chuck |
(1). KL / KLT /KLH solid hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch size and divided into 2- jaw type, 3-jaw type, 4-jaw... |
|
|
BU/BUT 2-Jaw / 3-Jaw Pull Back Draw Down Power Chuck for O.D.verticality and Parallelism |
(1). BU / BUT chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings. (2). When l... |
|
|
NHRS 45 degrees/90 degrees Automatic Subdivision Quartered Additional Angle Hydraulic Indexing Power Chuck |
(1). NHRS chuck can be 4 x 90 degrees indexing also added 3 degrees, 4 degrees, 5 degrees additional indexing; (2). Parts once clamping, Machinable... |
Все товары поставщика
Похожие товары
