KU/ KUT 2-Jaw /3-Jaw Slant-Column Pull Back Draw Down Solid Power Chuck for end positioning
(1). KU/KUT solid slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parallelism of the end surface. It only needs to change the clamps when different workpieces are installed.
(2). When processing different workpieces, only need to change the soft jaws to use.
(3).Centrifugal force compensation.
(4). Less maintenance, lower wear, long-term stable accuracy, constant clamping force.
(5). Repeat positioning accuracy up to: 0.025mm.
(6). Chuck diameter range: 110-381 mm, 4 to 15 inch
(7). Material: Steel.
(8). Clamp and pull back the workpiece, with a strong clamping force.
Other supplier products
|
|
NHU 45 degrees/90 degrees High-Speed Automatic Quartered Hydraulic Indexing Power Chuck |
(1). Due to the small outer diameter of the chuck, suitable for small CNC lathes. (2). In the work of no loss of grip, the smaller hydraulic pressu... |
|
|
KN/KT 2-Jaw / 3-Jaw Standard Lathe solid Hydraulic Power Chuck |
(1). KN / KT solid hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 15 inch, 18 inch, 21 inch, 24 inch size and divided into ... |
|
|
BN/BT/BH 2-Jaw / 3-Jaw / 4-Jaw Standard Lathe High Speed Hollow Hydraulic Power Chuck |
(1). BN / BT / BH hollow hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 15 inch, 18 inch, 21 inch, 24 inch size and divided... |
|
|
NHZ 60 degrees/120 degrees Automatic Trisected Hydraulic Indexing Power Chuck |
(1). Once loading card can process more than 2 stations. (2). Spindle rotation can be used for automatic indexing, for 6X60 degrees or 3X120 degree... |
|
|
PUE 3-Jaw Slant-Column Pull Back Draw Down Power Chuck for I.D. |
(1). PUE I.D. slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality, concentricity ... |
All supplier products
Same products
