.

Nitrogen Wave Soldering Machine KTN-450

Nitrogen Wave Soldering Machine KTN-450

  • Nitrogen Soldering Process
  • Solder pot capacity 480kg
  • Weight Approx.2500kg
  • Dimension: 5500*1600*1730mm
  • Product description: Nitrogen Wave Soldering Machine KTN-450,Nitrogen soldering process,PCB no need cleaning, high soldering quality for high end PCB production feild, like Robort arm, military feild etc.
  • INQUIRY

Nitrogen Wave Soldering Machine KTN-450

Products description

Infrared heating method, by this method, the air won't flow, It can keephigh level nitrogen levelin soldering part. easy to reach 30-50 PPM. High nitrogen level make thesolder clean and very few dross nearly no, and for the PCB surface it's very clean, no dross on the surface, soPCB no need cleaning, no need cleaning machine, save many cost for cleaning. High nitrogen level also make the solder more few empty holes inside the solder.

Machine Specification

Model

KTN-450

Solder pot type

4thadjustable

PCB width

Heating technology

Matrix straight heating, heating efficiency up to 95%

PCB convey height

750±50mm

Solder pot temp.

Room temp. to 350℃,accuracy±1-2℃

Conveyor speed

0-1800mm/Min

Solder pot temp. accuracy

±1℃

Angle

3~7 degree

Finger types

Strong titanium finger /customized

Component height limit

Solder bar adding way

Manually

Wave height range

0~18mm keep steady

Wave quantity

2

Machine control

PLC+PC

Preheating length

1800mm

Width adjust

Manually/motorized

Preheating zone

4zones

Flux adding way

Automatic

Conveyor direction

Left to right

Flux flow rate

10~100ml/min

Preheat power

10KW

Spray method

Step motor+ ST-6 nozzle

Preheat temp.

Room temp. to 250℃ (adjustable)

Flux recycle

Tray to collect

Heating model

Infrare Tube

Electricity

3P 5 wires 380V/3P 220V

Solder bar type

Lead-free

Total power

Solder pot power

14kw

Normal running power

Solder pot capacity

Air supply

4~7KG/CM2

Solder pot material

Cast iron

Dimension

5500*1600*1730mm

Weight

Machine coverStructureStreamline cover design, the frame is made of thick square tube, the cover is made of 2mm steel plate. There are totally 6 wheels to move the machine easily.Front door structureFully enclosed glass door, transparent,pneumatic holder to support, ensure the operating and repairing space.Machine topAnti-explosion lampSurface treatmentPainted with white colorFlux sprayingSpray nozzleSpray range:20~65mm,adjustable,nozzle height: 50~80mm adjustable,max. flow rate:100ml/minAir circuitAcid and alkali resistant air pipe, the brand is SMC from Japan.Nozzle moving systemStep motor to drive, Mitsubishi PLC, with proximity switch and entrance sensor to control, according to the coming PCB’s speed and width, the spraying system can detect and starts to work.Flux recycle systemTray to hold the waste water and flux, can be draw out easily, make maintenance very convenient.Flux exhaust systemExhaust system:stainless steel mesh frame+ double layers filter,recycle the flux to maximum.Isolated air curtainAir pressure type knife, blow the redundant flux into the recycling box, to avoid the flux to enter into the preheating zones, ensures the safety.Spraying box structureMade of full stainless steel, easy to clean and repair. Anti-corrosion, very durable.PreheatingPreheating length is 1800mm, divided into 4 sections,Infrared heating method, by this method, the air won't flow, It can keephigh level nitrogen levelin soldering part. easy to reach 30-50 PPM. High nitrogen level make thesolder clean and very few dross nearly no, and for the PCB surface it's very clean, no dross on the surface, soPCB no need cleaning, no need cleaning machine, save many cost for cleaning. High nitrogen level also make the solder more few empty holes inside the solder.Temp. control methodMitsubishi temp. collecting module, PID is very precise and stable.Heating partsThe heaters are imported from Taiwan, heat up very fast, with long life, small thermo lag; The heat is even in the zones.Preheating power22kwInstall modeThe heating module adopts drawer design, easy to replace and repair, make the maintenance very convenient.TransmissionRailMade of aluminum, wear resistant and without distortion.Rail parallelismWidth adjusting accuracy less than 0.2mmWidth adjustManually/motorizedC/V speed setting unitMin.1mm/min 0-1800mm/minC/V speed variation rangeElectric closed-loop control, within 0-10mm/minConveying motorPanasonic motor from JapanSolder potLow oxidization designHigh quality solder pot, the heat is very steady. Adopts liquid solder flow design, reduce the impact oxidization, especially for small PCB.Economical runningReduce the power consumptionMoving methodMotorizedWave adjustable height0-18mmWave motorTCG motor from Taiwan,adjust the wave height with frequency conversion.Preheating partsAdopts the stainless steel heaters from Taiwan, with long life and power saving up to 40% daily.CoolingCooling methodAdopts high power centrifugal fan, reduce the air bubble and solder pad strippingAutomatic finger cleaningImported premium pump, can wash the fingers from both sides. Propyl alcohol to clean and can be recycled.Control software★Automatic alarm function for failure::thermocouple abnormal,temperature is too high or too low;if preheating system or solder pot is abnormal, the heating stops.★Preheating temp., solder pot temp., conveyor speed, spraying and cooling can be controlled separately.★One week automatic power on/off setting (three times one day)★The emergency stops are in front, rear of the machine, press them in case of any emergency.Nitrogen protection system (option)Standard N2 configuration includes nitrogen closed construction, pipes, N2 flow meter, water chiller and oxygen analyzer.★N2 protection system, can prevent solder paste from oxidization, improving the moisture of soldering points, reducing the faults of soldering.★Low nitrogen consumption design(10-20cbm/Hour), oxygen density can be keep between 300-1000PPM.★Nitrogen can be reused after filtering, production cost is therefore saved.★Nitrogen flow rate and oxygen analyzing system are easy to be observed and adjusted by the flow meter and oxygen analyzer.

Keywords:

Wave Soldering Machine,Dual Rail Wave Soldering Machine,High End Wave Soldering Machine,Nitrogen Wave Soldering Machine,China Wave Soldering Machine,Wave Soldering Machine Manufacturer.

Flason Electronic Co, Ltd provide a fullSMT Assembly Linesolutions, includingSMT reflow oven,Wave Soldering Machine,Pick and Place Machine,solder paste printer,PCB loader,PCB unloader,SMT AOI Machine,SMT SPI Machine,SMT X-Ray machine,SMT assembly lineequipment,smt spare partsetc, any kind SMT machines you may need, please contact us by: Email:



Отправить запрос, связаться с поставщиком

Кому: flason SMT
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

SMT X Ray machine SMTkait
SMT X Ray machine SMTkait SMT X Ray machine SMT X Ray machine PCB quality inspection machine PCB x ray machine PCB inspection machine Product description: SMT X Ray m...
SMT Assembly line
SMT Assembly line SMT Assembly line SMT Assembly line PCB assembly line PCB production line SMT production line Product description: SMT Assembly line Good pr...
Hanwha SM481 PLUS Pick and Place Machine
Hanwha SM481 PLUS Pick and Place Machine Hanwha SM481 PLUS Pick and Place Machine Speed 40,000 CPH PCB : Max. 510(L) x 460(W) Component available: Minimum 01005-38*38*8.5mm Weight: 1...
High Speed Automatic JUKI SMT production line SMTkait
High Speed Automatic JUKI SMT production line SMTkait High Speed Automatic JUKI SMT production line JUKI SMT Assembly line JUKI PCB Assembly line JUKI SMT production line JUKI PCB production line...
12 Zones Economical SMT Reflow Oven KTE-1200
12 Zones Economical SMT Reflow Oven KTE-1200 12 Zones Economical SMT Reflow Oven KTE-1200 Heating zones qty. Top 12, bottom 12 Cooling zones qty. Top 2 Dimension 6960*1360*1490mm Weight ...
Все товары поставщика

Похожие товары

Synthetic Cryolite
Synthetic Cryolite Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY Synthetic Cryolite General Description ofSynthetic Cryolite Sodium HexafluoroaluminateFormula: Na...
Sodium Fluosilicate/Hexafluorosilicate (SSF)
Sodium Fluosilicate/Hexafluorosilicate (SSF) Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY Sodium Fluosilicate/Hexafluorosilicate (SSF) General Description of Sodium Fluosilicate/Hexafluor...
Raw Materials
Raw Materials Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY Metallurgical flux coating materialrefers to the material which can separate metal from mineral b...
Mg Alloy Flux
Mg Alloy Flux Продавец: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY Magnesium alloyfluxhas a low melting point and small heat capacity. When heated in the air, it ge...
 Станок для лазерной резки винила
Станок для лазерной резки винила Продавец: Unikonex Technologies Co., Ltd. Вы знаете, какой самый современный станок для резки винила? Быстрая, долговечная и точная лазерн...