Building Materials Combustibility Test Chamber

• 

Building materialsfire resistance testis a very importantandprofessionaltestin safety engineering. The national standard, GB/T8626-2007. specifies the conditions under which building materials are combustible as well as the combustibility of combustible building materials.

Building material combustibility test chamber is R&D and developed according to GB/T8626and ISO11925. suitable for the determination of the combustibility of building materials by using small flame to directly contact the vertically placed specimen in the absence of additional radiation conditions. It applies to the latest version of GB8624-2014. combustion test for building materials’ fireproofing classification, and it is able to test grade A, B1.B2.etc.

Standards

EN ISO 11925-2Reaction to fire tests--Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test

DIN53438Testing of combustible materials - response to ignition by a small flame- edge ignition

DIN4102-1Fire behavior of building materials and elements-classification of building materials-requirements and testing

GB/T 8626Test method of flammability for building materials.

Control System

1.PLC control:

Automatic timing, automatic fire detection, automatic ignition, ignition anomaly protection.

2.LCD touch screen display:

Monitor the test data in real time. Check the data of six samples and alarm contents.

Features

The chamber is powder coated, beautifully designed, with a transparent tempered glass window on the front door of the chamber, fire-resistant and easy to observe the test.

A commissioning handle is designed on the outside of the chamber, through which the burner can be vertically moved.

All internal tooling is made of stainless steel, beautiful and anti-corrosive.

Two kinds of stainless steel sample clamps are equipped.

Automatic ignition, high degree of test automation.

The height of the flame can be adjusted, withtheheight gaugesequipped.

Simple operation, good stability, accurate experimentaldata.

Technical Parameters

Другие товары поставщика

	AATCC Gray Scale for Color Change	Applicable Standards The AATCC Gray Scale aligns with international colorfastness evaluation protocols, including: AATCC Evaluation Procedure...
	Computer controlled memory impact testing machine	Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,...
	Rubbing Color Fastness Tester	Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the...
	Taber Abrasion Tester (Double-Head)	Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas...
	Fabric Fiber Shedding Degree Tester (Friction)-QINSUN	Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca...

Похожие товары

	MMA-120 Handheld Arc Welder	Продавец: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...