Building Materials Combustibility Test Chamber

• 

Building materialsfire resistance testis a very importantandprofessionaltestin safety engineering. The national standard, GB/T8626-2007. specifies the conditions under which building materials are combustible as well as the combustibility of combustible building materials.

Building material combustibility test chamber is R&D and developed according to GB/T8626and ISO11925. suitable for the determination of the combustibility of building materials by using small flame to directly contact the vertically placed specimen in the absence of additional radiation conditions. It applies to the latest version of GB8624-2014. combustion test for building materials’ fireproofing classification, and it is able to test grade A, B1.B2.etc.

Standards

EN ISO 11925-2Reaction to fire tests--Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test

DIN53438Testing of combustible materials - response to ignition by a small flame- edge ignition

DIN4102-1Fire behavior of building materials and elements-classification of building materials-requirements and testing

GB/T 8626Test method of flammability for building materials.

Control System

1.PLC control:

Automatic timing, automatic fire detection, automatic ignition, ignition anomaly protection.

2.LCD touch screen display:

Monitor the test data in real time. Check the data of six samples and alarm contents.

Features

The chamber is powder coated, beautifully designed, with a transparent tempered glass window on the front door of the chamber, fire-resistant and easy to observe the test.

A commissioning handle is designed on the outside of the chamber, through which the burner can be vertically moved.

All internal tooling is made of stainless steel, beautiful and anti-corrosive.

Two kinds of stainless steel sample clamps are equipped.

Automatic ignition, high degree of test automation.

The height of the flame can be adjusted, withtheheight gaugesequipped.

Simple operation, good stability, accurate experimentaldata.

Technical Parameters

Other supplier products

	Fogging Tester	Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A...
	Fabric Anti-Electromagnetic Radiation Performance Tester	Standards GB/T23326. GB/T25471. ASTM D4935. SJ2054 Application It is used for testing the electromagnetic shielding effectiveness of electromagn...
	Temperature and Humidity Alternating Test Chamber for Automotive Wires-QINSUN	The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wire...
	Fogging Tester for Automotive & Textile Materials-QINSUN	Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash...
	Automotive Wires Low - temperature Impact Tester	Test standard: ISO 6722. ISO 14572. ISO 19642. SAEJ 1128. QC/T 730. JASOD611-2009 Technical parameters: 1) Low temperature impact height: 50-2...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...