Fireproof coatings tester chamber method
Standards
GB 14907—1994、GB 14907—2002、ETAG：2006、BS 8202:1992:2
Sample making
1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75 "broadleaf wood plywood", its size is 300mmx150mmx5mm, and the surface of the sample should be smooth and smooth, without joints and other defects.
2. before the test board is coated with fireproof paint, the state should be adjusted to constant at the temperature of 25±1℃ and the relative humidity of 60%——70% (the weight change of 24h interval is not more than 0.1%)。
3. according to the coating ratio of 200——250g/m2 (thick paste coating allows to increase to 500g/m2) to test the fire retardant coating evenly covered on the surface of the test plate and around, when the need for multiple coating, the interval between two times should be 24h.
The finished specimens shall be adjusted to constant weight according to the condition state specified in 2 articles, and ten specimens of each fireproof coating shall be prepared.
Technical parameters
The specimen holder can be tilted 450±20
Copper combustion cup: Outer diameter 24mm± 0.1mm,
The wall thickness is 1mm±0.06mm, the height is 17mm±0.1mm and the volume is 6mL
Fuel: Chemically pure grade anhydrous ethanol
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fully Automatic Vision Measuring Machine | Standards： JJF 1318-2011 Product advantages: 1. full mouse, handle type automatic control, simple to use, high efficiency, good stability 2. ca... |
 |
High - temperature Pressure Testing Device | Standards ComplianceISO 6722, SAEJ 1128, QC/T 730, GB/T 33549, CQC1103 - 1105 - 2015, etc. Main Configurations 1. Testing device: 2 - station or ... |
 |
Carton drop tester | Product introduction： It is mainly used to simulate the impact of the drop impact on the packaging during transportation and loading and unloadi... |
 |
Air - tightness Testing Device for Automotive Connectors | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightness of seals or connectors. 2. The positive pressur... |
 |
Car seat fatigue tester-QINSUN | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
