Paper Gypsum Board Fire Stability Tester

• 

Introduction

gypsum board fire stability tester, also known as paper gypsum board fire stability tester, is used to determine the fire stability of refractory gypsum board, also applicable to other building materials, decoration, Determination of the fire resistance of decorative materials.

Test Description: The sample is drilled and processed under specified environmental conditions. The sample is suspended by a strut between the two fire exits, and the fire exit is perpendicular to the surface of the sample. The liquefied petroleum gas is used as a heat source to supply gas to the two burners of the fire stability measuring instrument, and the burner firing port is 30 mm from the plate surface. The load is suspended at the lower end of the test piece according to the standard, and the burner is ignited. The temperature was measured with a thermocouple at a distance of 5 mm from the surface of the plate. At the beginning of the test, the carbonized protective paper dropped on the thermocouple should be removed without shaking the sample. By adjusting, the temperature was controlled at (800 ± 30) °C within 3 min, and this temperature was maintained throughout the test. From the start of the test piece to the fire, the test piece breaks and breaks. The time during which each test piece was blown was recorded, and the minimum of the five test pieces was taken as the fire stability of the set of samples, accurate to 1 min.

Standard

GB/T9775-99

Application

Suitable for thermal stability of paper gypsum board in case of fire

Parameters

1. combustion temperature :600——850℃

2. gas pressure :2.75±0.49kPa

3. use gas: propane, gas, liquefied gas

4. flow adjustment range :100——1000L/h

5. temperature measuring range :0——1199℃

6. suspension load :0.75——2.5kg

7. power supply, power :220V50Hz120W

8. Net weight :60kg

Другие товары поставщика

	Fabric liquid penetration tester	Main Parameters 1. The penetrating disc is made of special organic glass through special processing, ensuring a weight of 500 grams ± 5 gra...
	Large Flame Flammability Tester	IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq...
	Taber Abrasion Tester (Double-Head)	Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas...
	Automobile seat belt fixed point test bench	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me...
	PLC liquid crystal touch impact testing machine (simple suspension)	Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile)， reinf...

Похожие товары

	High speed reciprocating friction wear tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester for...
	Custom fully automatic falling sand abrasion tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester to ...
	Measuring devices for nanoindentation	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Measuring hardness and elas...
	Multi function Vacuum Tribometer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is designed for ...
	Custom low-load wear testing instrument	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Low-Load Wear Testing Ma...