Print Rub Tester
Product Introduction:
Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.
Meet the standard:
GB/T 7706-2008
Test principle:
The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.
Product Advantages:
Measures Key Durability Property: Quantifies the resistance of printed surfaces and coatings to friction and abrasion.
Standard Compliant: Designed to meet specific national standards for rub resistance testing of printed matter (GB/T 7706).
Versatile Material Testing: Applicable to a range of printed materials, inks, coatings, and related surfaces.
Controllable Test Parameters: Allows for precise control of friction pressure, speed, and the number of cycles.
Automatic Test Process: Microcomputer control enables automated testing for consistency and efficiency.
Provides Objective Assessment: The principle involving density measurement allows for a quantitative evaluation of wear.
Scope of application:
Printed matter: Test of wear resistance of surface layer
Ink: ink, polish wear resistance test
Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test
Technical parameters:
Friction pressure: 20±0.2N（different pressure can be customized）
Friction speed: 21, 43, 85, 106r/min adjustable
Friction area: 100（L）mm×50（B）mm
Friction stroke: 60mm
Friction Times: 0 —— 999999 Times
Sample size: 230（L）mm×50（B）mm
Power supply: 220V 50Hz
Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation
Standard configuration:
Main engine, standard friction block
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Double Pendulum Digital Tear Tester | The double pendulum digital tear tester is mainly used to measure the ability of various fabrics (such as clothing fabrics, home textile fabrics, e... |
 |
Aircraft wire wear testing machine | Applicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting ... |
 |
IBC cleaning systems,ibc cleaning equipment,high pressure ibc washer | Model Semi-automatic IBC tote washer Spray angle 360° Material stainless steel Max. Pressure 150 bar Voltage 380V (or on request) Voltage of IB... |
 |
Radiant heat drop tester | Feature: Automotive interior materials droplet characteristic testeris according to appendix 7 of ECE R118 to determine the melting characterist... |
 |
Automatic Wire Stripping Machines | Product Introduction: Automobile wire cutting tester is the main instrument for testing the insulation strength of automobile wire, and it is th... |
Похожие товары
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Продавец: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Продавец: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
