Print Rub Tester
Product Introduction:
Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.
Meet the standard:
GB/T 7706-2008
Test principle:
The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.
Product Advantages:
Measures Key Durability Property: Quantifies the resistance of printed surfaces and coatings to friction and abrasion.
Standard Compliant: Designed to meet specific national standards for rub resistance testing of printed matter (GB/T 7706).
Versatile Material Testing: Applicable to a range of printed materials, inks, coatings, and related surfaces.
Controllable Test Parameters: Allows for precise control of friction pressure, speed, and the number of cycles.
Automatic Test Process: Microcomputer control enables automated testing for consistency and efficiency.
Provides Objective Assessment: The principle involving density measurement allows for a quantitative evaluation of wear.
Scope of application:
Printed matter: Test of wear resistance of surface layer
Ink: ink, polish wear resistance test
Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test
Technical parameters:
Friction pressure: 20±0.2N（different pressure can be customized）
Friction speed: 21, 43, 85, 106r/min adjustable
Friction area: 100（L）mm×50（B）mm
Friction stroke: 60mm
Friction Times: 0 —— 999999 Times
Sample size: 230（L）mm×50（B）mm
Power supply: 220V 50Hz
Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation
Standard configuration:
Main engine, standard friction block
Send product request
Other supplier products
 |
Safety Helmet Electrical Insulation Tester | Product Introduction: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high d... |
 |
Car seat component clearance test bench-QINSUN | Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-200... |
 |
JIS Colour Fastness Rubbing Tester (Gakushin)-QINSUN | Product Overview TheJapanese Standard Color Fastness to Rub Tester (Gakushin)is a specialized instrument designed to evaluate the colorfastness of... |
 |
Computer controlled memory impact testing machine | Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,... |
 |
Textile Light and Heat Performance Tester | Product Overview TheTextile Light and Heat Performance Testeris a multi-functional instrument designed to evaluate textile durability under combin... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
