Shoelace anti-siphon tester
Product Introduction
Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon waterproof performance.
Standards
GB/T 17219
EN 1717
ASTM F2023
ISO 3822-4
Waterproof
Refers to the waterproof agent on the surface of the fabric to form a film, so that water can not penetrate the inside of the fabric is called waterproof.
Anti-siphon can be divided into static anti-siphon and dynamic anti-siphon two categories. Static anti-siphoning is to adopt a static suspension method to observe whether the liquid immersed in the fabric has a climbing phenomenon, and the climbing height to assess whether it is qualified.
Product Advantages
Measures Key Moisture Management Property: Quantifies static wicking or anti-siphon behavior, which is important for footwear comfort and preventing water ingress.
Suitable for Various Materials: Applicable to a range of footwear components and materials, including textiles, leather, and laces.
Simultaneous Testing: Allows testing of multiple samples concurrently (up to 20), increasing efficiency.
Provides Objective Measurement: Measures the actual height of water climb over a specified time.
Simple Test Principle: The static suspension method is straightforward to implement and understand.
Product Features
Stand or rack with multiple stations for vertically suspending test specimens.
Water bath or trough at the base with controlled water level (450mm maximum height capability, although the immersion position is 13mm).
Clips or clamps to hold the upper end of the samples securely on the suspension stand.
Measuring scale or ruler positioned alongside each sample to accurately read the height of water rise.
Capability to test a specific number of samples simultaneously (20 samples).
Designed to accommodate specific sample sizes based on material type (Leather, mesh: 7625MM; Shoelaces, webbing: 76width MM; Line type: 76*width MM).
Designed for testing with a specific immersion position (13mm) and suspension times (0.5 hours and 2 hours).
Technical Parameters
1. Leather, mesh: 76*25MM
2. Shoelaces, webbing: 76* width MM
3. Line type: 76* width MM
4. Samples can be tested at the same time: 20
5. Water level height: 450mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
45 Degree Flammability Tester | Standard ASTM D1230: Flammability of Apparel Textiles (45° Inclined Method) CFR 16 Part 1610: Flammability of Clothing Textiles (Federal St... |
 |
Drying Rate Tester | The drying rate tester is a professional device used to measure the drying rate of a substance. Application fields Textile industry: used to eva... |
 |
Wool Fineness Analyzer | Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ... |
 |
Static Tensile Tester-QINSUN | Standard ASTM D3107Ensurereliable measurement of fabric elongation and tensile properties under controlled force applications. Product Advantages... |
 |
Fabric Down-Proof Impact Tester (Impact Method) | Introduction The first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact nee... |
