Shoelace anti-siphon tester
Product Introduction
Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon waterproof performance.
Standards
GB/T 17219
EN 1717
ASTM F2023
ISO 3822-4
Waterproof
Refers to the waterproof agent on the surface of the fabric to form a film, so that water can not penetrate the inside of the fabric is called waterproof.
Anti-siphon can be divided into static anti-siphon and dynamic anti-siphon two categories. Static anti-siphoning is to adopt a static suspension method to observe whether the liquid immersed in the fabric has a climbing phenomenon, and the climbing height to assess whether it is qualified.
Product Advantages
Measures Key Moisture Management Property: Quantifies static wicking or anti-siphon behavior, which is important for footwear comfort and preventing water ingress.
Suitable for Various Materials: Applicable to a range of footwear components and materials, including textiles, leather, and laces.
Simultaneous Testing: Allows testing of multiple samples concurrently (up to 20), increasing efficiency.
Provides Objective Measurement: Measures the actual height of water climb over a specified time.
Simple Test Principle: The static suspension method is straightforward to implement and understand.
Product Features
Stand or rack with multiple stations for vertically suspending test specimens.
Water bath or trough at the base with controlled water level (450mm maximum height capability, although the immersion position is 13mm).
Clips or clamps to hold the upper end of the samples securely on the suspension stand.
Measuring scale or ruler positioned alongside each sample to accurately read the height of water rise.
Capability to test a specific number of samples simultaneously (20 samples).
Designed to accommodate specific sample sizes based on material type (Leather, mesh: 7625MM; Shoelaces, webbing: 76width MM; Line type: 76*width MM).
Designed for testing with a specific immersion position (13mm) and suspension times (0.5 hours and 2 hours).
Technical Parameters
1. Leather, mesh: 76*25MM
2. Shoelaces, webbing: 76* width MM
3. Line type: 76* width MM
4. Samples can be tested at the same time: 20
5. Water level height: 450mm
Send product request
Other supplier products
 |
Toyota Specialized Abrasion Tester-QINSUN | Standard JIS L 0849(Japanese Industrial Standard for Abrasion Resistance of Textiles) ISO 5470-2(Rubber- or Plastics-Coated Fabrics — Abras... |
 |
Vapor Shrinkage Tester-QINSUN | I. Product Overview TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, pol... |
 |
45-degree dry cleaning tester | Product Introduction: The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agen... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce t... |
 |
Swimming goggles sealing tester | Applicable standards: Seal test equipment for swimming goggles according to ISO 18527-3 Product Introduction: The tightness of goggles according... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
