Dry Cleaning & Washing Cylinder

• 

Introduction

The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.

It is used to test the color fastness for the dry cleaning and chlorine water washing fabrics.

Standards

AATCC 162 Colorfastness to water: Chlorinated pool.

16CFR PART 1610Standard for the flammability of clothing textiles.

Application

Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.

Operation

●Clean the dry cleaning cylinder

●prepare the hardness concentrates according to the relevant standards.

●51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.

●If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.

●5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.

●Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.

●Get out the sample and remove the excess solution.

Technical Parameters

Другие товары поставщика

	Chemical Reactor Cleaning System	Total ChemicalReactor Cleaning Systems Reactor Cleaning Systems are designed to safely and effectively peel and clean scale stuck to the inside of...
	Leather Seam Fatigue Tester	Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo...
	Geomembrane thickness tester	Scope of application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ...
	Impact strength tester for car seat launching headrest	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collis...
	Automotive Bed Liner Strength Testing Machine-QINSUN	Standard ASTM D624(Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers) ISO 37(Rubber, Vulcan...

Похожие товары

	High speed reciprocating friction wear tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester for...
	Custom fully automatic falling sand abrasion tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester to ...
	Measuring devices for nanoindentation	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Measuring hardness and elas...
	Multi function Vacuum Tribometer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is designed for ...
	Custom low-load wear testing instrument	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Low-Load Wear Testing Ma...