Dry Cleaning & Washing Cylinder

• 

Introduction

The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.

It is used to test the color fastness for the dry cleaning and chlorine water washing fabrics.

Standards

AATCC 162 Colorfastness to water: Chlorinated pool.

16CFR PART 1610Standard for the flammability of clothing textiles.

Application

Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.

Operation

●Clean the dry cleaning cylinder

●prepare the hardness concentrates according to the relevant standards.

●51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.

●If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.

●5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.

●Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.

●Get out the sample and remove the excess solution.

Technical Parameters

Other supplier products

	Footwear Dynamic Waterproof Tester	Product Introduction: It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enter...
	Geosynthetic Clogging Tester	Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s...
	Rating Observation Board-QINSUN	Product Overview TheRating Observation Boardis an intelligent monitoring system designed for real-time evaluation and visualization of product qua...
	Thermal Radiation Flooring Combustion Tester	Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi...
	Automotive Wires Liquid Resistance Tester	Test Standards: Requirements for liquid resistance tests of automotive wires in ISO 6722. SAE J1128. QC/T 730. and JASOD611 Main Parameters: T...

Same products

	Tabletop Xenon Arc Weathering Tester (SunMaster)	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat...
	Blow-By Test Rig	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa...
	Air filter System（ISO 16890/EN 779）	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a...
	Oil Thread Leak Test System	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ...
	Manual HEPA/ULPA Filter Scanning Test System	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan...