Next Generation Impactor(NGI)
The next generation impactorTM, or NGITM, is a high performance cascade impactor for classifying aerosol particle into size fractions for testing meter-dose and dry-power inhaler and other inhaled drug delivery devices such as nebulizers and nasal sprays. MSP developed the NGI in conjunction with a consortium of 15 pharmaceutical companies, resulting in superior aerodynamic performance, low inter-stage losses, and user-friendly features, The NGI is recognized internationally both in the USP and the EP. It features removable collection cups, O-ring-free connections, and a micro-orifice collector that can be used in place of a final filter for most formulation. These features make the NGI an easy-to-use, efficient workstation, enabling 10 to 20 inhaler determinations per day with one impactor, resulting in less capital equipment and a cleaner, more efficient laboratory.
Designed specifically for the pharmaceutical industry for testing metered-dose inhalers (MDI), dry-power inhalers (DPI), nebulizer and nasal sprays.
Provides high-accuracy data and unappalled productivity.
Features
1.Seven impaction stages plus a final micro-orifice collector that can be used in place of a final filter for most formulations.
2.Known stage cut size from 15L/min to 100L/min with no change of parts needed for entre range.
3.Also calibrated at 15L/min specifically for nebulizers.
4.Seven stages with at least five with D50values between 0.54 and 6.12 μm at all design flow rates.
5.Removable set of collection cups, hinged removable lid, and O-ring free inlet connections.
6.Electrically conductive and corrosion resistant.
7.316 stainless steel USP induction port.
8.One pre-separator for entire range of 30L/min to 100L/min W/O changing parts.
Technical Parameters
| Items |
Parameters |
| Flow rate |
15-100L/min |
| Stage cut point(1-7 stages) |
Look up the USP 601 Section, Table 6 for more information |
| D50@30L/min |
11.4, 6.4, 4.0, 2.3, 1.4, 0.80, 0.54 µm |
| D50@ 60 L/min |
8.1, 4.4, 2.8, 1.7, 0.94, 0.55, 0.34 µm |
| D50@100 L/min |
6.1, 3.4, 2.2, 1.3, 0.72, 0.40, 0.24 µm |
| Weight |
9kg |
| Dimension |
600 x 330 x 130 mm (L x W x H) |
Другие товары поставщика
|
|
Resistance to flame propagation tester |
This equipment is designed and manufactured according to ECE R118 Annex 10. This model is intelligent, with PLC and touch screen intelligent contro... |
|
|
Cone calorimetric test equipment| Testing Equipment |
Heat release is the core measurement parameter for assessing material and product fire characteristics. The cone calorimeter meets all existing sta... |
|
|
Smoke Density Chamber |
The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combustion or radiati... |
|
|
Floor material combustion tester |
Scope of application:
The floor material combustion test device is suitable for all kinds of floor materials, such as textiles, carpets, cork boar... |
|
|
Alcohol burner combustion tester |
Technical parameters:
1. Combustion time :0——9999 seconds can be set arbitrarily, the standard uses 30 seconds;
2. Flame and blazing ... |
Все товары поставщика
Похожие товары
