Leather Water Vapor Permeability Testing Machine
The vaporpermeability of leather is evaluated by means of measuring the weight of water-vapor that permeates to specimen perunit time and per unitarea. The main functional components includes: testing holder clamp, ventilation fan, control panel with functions of switch, time setting and recording.
The machine has six separate test stations on a rotary table and each one has a sample holder. Silica gel desiccant is placed in the holder and the test material is placed over the neck of the holder and secured by a screw top. After weighing each holder, complete with silica gel and sample material, the holders are placed and locked into the rotary mechanism.
After 7-8 hours the complete holder is weighed again and the gained weight is used to determine the degree of permeability. It is essential that the entire operation is carried out in a conditioned atmosphere of 20°C and 65% per cent relative humidity. In addition to the standard equipment, the tester is also supplied with a built-in timer to record the number of hours that testing has been carried out.
Standards
UNI EN IUP/15. UNI EN 13515.
EN ISO 20344: 6.6. IUP 15. BS 3144 Method 24.
SLP 25.DIN 53333. ISO 17699.
DIN 53 429. METODO - 309 WI 009
Applications
Shoes water vapour permeability testeris mainly applicable to leathers and textiles used in footwear uppers and clothing where it gives a measure of the ability to remove perspiration from the surface of the wearer's skin.The tester is used to determine the amount of water vapour a material will transmit through its structure in a specified time.
Technical Parameters
1. Temperature Range: 20-60°C
2. Humidity Range: 40-95% (no-load)
3. Temperature Accuracy: ±0.5°C (no-load)
4. Humidity Accuracy: ±3% (no-load)
5. Chiller: Air-cooled, sealed compression type
6. Cooler: Fin-type condenser
7. Humidifier: Pot-type humidifier (with burnout preventer)
8. Heater: Fin-type radiator (with overheat preventer)
9. Blower: Fan (upper and lower)
10. Air Speed Adjustment Range: 0.5-1.5 m/s
11. Rotating Frame: Two upper and lower stages (270 mm diameter)
12. Indoor Dimensions: Approximately W400 × D360 × H500 mm
13. Power Supply: AC 220V 50Hz
14. External Dimensions: Approximately W1100 × D550 × H1470 mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Anti-drill tester (Friction method) - lab instrument | TheAnti-drill Tester (Friction Method)is a specialized instrument designed to evaluate the drill resistance of materials such as composites, polyme... | |
| Gravel Resistant Impact Tester/Stone chip tester | The Gravel Resistant Impact Tester/Stone Chip Tester T201 is specifically designed for gravel impact testing of automotive materials and surface co... | |
| Battery Nail Penetration Tester | Battery Nail Penetration Tester is designed for evaluating the safety performance of lithium-ion batteries and battery packs under extreme internal... | |
| Xenon Arc Weatherometer - Test Equipment | The xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the destructive... | |
| Stone hammer blow testing instrument | Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are... |
Похожие товары
| Blanket Flammability Test Machine | Продавец: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... | |
| High Temperature Oxygen Index Tester | Продавец: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... | |
| Limiting Oxygen Index Tester | Продавец: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... | |
| Vertical Flammability Tester | Продавец: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... | |
| 45 Degree Flammability Tester | Продавец: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
















