Leather Water Vapor Permeability Testing Machine

• 

The vaporpermeability of leather is evaluated by means of measuring the weight of water-vapor that permeates to specimen perunit time and per unitarea. The main functional components includes: testing holder clamp, ventilation fan, control panel with functions of switch, time setting and recording.

The machine has six separate test stations on a rotary table and each one has a sample holder. Silica gel desiccant is placed in the holder and the test material is placed over the neck of the holder and secured by a screw top. After weighing each holder, complete with silica gel and sample material, the holders are placed and locked into the rotary mechanism.

After 7-8 hours the complete holder is weighed again and the gained weight is used to determine the degree of permeability. It is essential that the entire operation is carried out in a conditioned atmosphere of 20°C and 65% per cent relative humidity. In addition to the standard equipment, the tester is also supplied with a built-in timer to record the number of hours that testing has been carried out.

Standards

UNI EN IUP/15. UNI EN 13515.

EN ISO 20344: 6.6. IUP 15. BS 3144 Method 24.

SLP 25.DIN 53333. ISO 17699.

DIN 53 429. METODO - 309 WI 009

Applications

Shoes water vapour permeability testeris mainly applicable to leathers and textiles used in footwear uppers and clothing where it gives a measure of the ability to remove perspiration from the surface of the wearer's skin.The tester is used to determine the amount of water vapour a material will transmit through its structure in a specified time.

Technical Parameters

1. Temperature Range: 20-60°C

2. Humidity Range: 40-95% (no-load)

3. Temperature Accuracy: ±0.5°C (no-load)

4. Humidity Accuracy: ±3% (no-load)

5. Chiller: Air-cooled, sealed compression type

6. Cooler: Fin-type condenser

7. Humidifier: Pot-type humidifier (with burnout preventer)

8. Heater: Fin-type radiator (with overheat preventer)

9. Blower: Fan (upper and lower)

10. Air Speed Adjustment Range: 0.5-1.5 m/s

11. Rotating Frame: Two upper and lower stages (270 mm diameter)

12. Indoor Dimensions: Approximately W400 × D360 × H500 mm

13. Power Supply: AC 220V 50Hz

14. External Dimensions: Approximately W1100 × D550 × H1470 mm

Other supplier products

	seat foam compression hardness tester manufacturer	1. Product Overview The Car Seat Foam Performance Tester is a professional testing system designed to evaluate the mechanical properties of automo...
	Fogging Tester - Test Equipment	Fogging Tester is mainly used to test the evaporation of volatile components in materials such as interior plastic parts of automobiles and aircraf...
	Comprehensive Engine Oil Filter Test Bench	Application This test bench is designed for comprehensive evaluation of engine oil filters, including spin-on filters and filter bypass valves. It...
	Contact Coolness Tester	The sensation of coldness or warmth when skin touches an object is referred to as the "coldness and warmth feeling". The feeling of coldness or war...
	Smoke Density Test Apparatus	The touch screen computer dual control smoke density tester for building materials is developed according to the technical conditions specified in ...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...