LIFT, IMO Spread of Flame Apparatus

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Email: serving@qinsun-lab。com

This machineis designed according to ISO5658-2 standard D andproduction,while meeting the IMO FTP Code Resolution A. 653 (16) and ASTM E 1317 requirements. Lateral flame propagation properties for the determination of building products, flame propagationperformance / flamespread rate of speed can evaluate the fire retardant properties of the material.

The device via a gas radiant plate to heat samples and with heat flow meter to calibration; Test samples were placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the pilot flame test sample, but not in contact with the test sample, the sample was heated end ignited gas on the surface of the evaporator.

After ignition, recording the development of the flame front, and record the flame front in a horizontal direction to reach the surface of the sample,combustiondistance of each calibration elapsed time. Further testing materials include light heat, sustained combustion heat, critical flow, the average sustained burn calories, the total heat release and other relevant parameters.

Standards

• ISO 5658-2: reaction to fire test - Flame spread Part 2: Vertical distribution of building products side flame spread level.

• IMO FTP Code Resolution A. 653 (16): bulkhead, ceilinganddeck material flammability test procedures Advice

• ASTM E 1317: Marine Surface Finishes Standard Test Method for Flammability

ASTM E1321

Main Features

• The cabinet is made of stainless steel, corrosion-resistant and beautiful and easy to clean; The main framehavetwo separate parts of the burner frame and the specimen support framework. Two parts connected by bolts, and screws can beflexiblemechanical adjustment.

• Ignition sources: radiation plate and the United States imports a propane torch. Precise control of the flame height

• Burner, (200 ± 10) mm long holes ceramic tube,

• Cylinder type pilot burner flame support IMO standard automatic impact test; Optional

• Double grid and an enlarged perspective mirror observe the flamespread ,it is user-friendly

• Radiation plate temperature controller: prevent flames turned the heat radiating plate rear side;

• Flow controller can easily test content of methane in the test gas flame heat

• Gas supply: with a valve, zero-pressure valve, tempering valves, solenoid valves and a mixer, the mixed air and fuel gas supplied to the radiation plate.

• Providing a porous alignment plate and heat flow meter fixed on a sliding movement rail to detect heat flux if meet the standard requirements

• Equipped with an adjustable observation angle lens (750mm × 120mm), the test sample can rake through the glass mirror and observe the flame spread rate and by a foot switch,automaticrecord.

• Sample chimney equipped with compensating thermocouples.

• All radiant panel combustion control system safety explosion-proof, check valve, cut off the gas solenoid valve prevents the gas reflux

• The camera can observe a situation and save the test program (Optional)

• Measuring heat flow state within the range of the radiation plate for 50mm

• Data acquisition system can store the image length flame spread and combustion characteristics

• 19 "rack to measure the flame spread rate analysis, critical flow, heat release rate

• Radiation plate burner system is fully automated, with spark ignition and safetyprotectsystem;

•IMOprogram so that all calibration, test results print (IMO, ISO) easier (Optional)

Specification

Model	STD-ISO5658-2
Size	1.710(W)×1.100(D)×1.985(H)mm
Console Size	600(W)×750(D)×1.600(H)mm
Power	AC 220V, 50/60Hz, 30A
Weight	200kg
Operating Manual	Supplied
Exhaust	Minimum 30m2/ min
Other requirements	Methane, PC, compressed gas, camcorders

Другие товары поставщика

	High-Collimation AAA-Grade Solar Simulator | ASTM ISO Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheHigh-Collimation AAA-Grade Solar Simulatoris designed to provide a concentrated...
	Automatic Long Filament Curl Shrinkage Tester	The Automatic Long Filament Curl Shrinkage Tester is designed to measure boiling water shrinkage rate, dry heat shrinkage rate, curl shrinkage rate...
	Taber Abrasion Resistance Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards ISO Standards: ISO 9352, ISO 5470, ISO 7784 ASTM Standards: ASTM D1044...
	Fiber Oil Extractor | ASTM ISO Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Fiber Oil Extractor, also known as the Rapid Grease Extraction Apparatus, is d...
	Safety Helmet Chin-strap Strength Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Safety Helmet Chin-strap Strength Tester is designed to evaluate the tensile s...

Все товары поставщика

Похожие товары

	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
	PanPHE gasketed plate heat exchangers	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...