Taber oscillation and wear instrument
Taber oscillation and wear instrumentTechnical Parameters:
Taber oscillation and wear instrumentis also commonly referred to as "sand oscillator".It is primarily used to test the properties of transparent materials and coatings coated on glass and lenses, and it can also be used to evaluate the abrasion resistance of organic coatings, plastics, metals and other materials
The sample is fixed in the fixed fixture at the bottom of the sand table and the surface of the sample is exposed to a height of no more than 1 mm.Place a uniform depth of standard abrasive media such as quartz sand or alumina in the sand table
The sandbox is moved back and forth in a specific drive drive to drive the abrasive media in the entire sand table.This random scratches of the media can be used to simulate the wear and tear of the product in daily life
In addition, Taber oscillatory wear instrument also allows users to use liquid grinding slurry for wear and corrosion testing.Buy the relevant accessories, the user can also lens "Bayer test".The purpose is primarily for comparison with the reference lens
The test parameters of the Taber Oscillation Meter can be adjusted so that the user can choose the length of the back and forth (0.25 to 6 inches) and the speed (100-200 rounds per minute).In addition, the oscillating mill allows the user to use different types of abrasive media including quartz sand, alumina, emery and glass beads for testing
Taber oscillation and wear instrumentbasic operation:
1. The sample is fixed in the fixed fixture at the bottom of the sand table, the sample surface exposed height of not more than 1mm;
2. Put a uniform depth of standard abrasive media such as quartz sand or alumina in the sand table;
3. Sand table in a specific drive driven before and after the reciprocating movement, thus driving the entire sand table in the wear medium movement;
4. This random scrape pattern of the wear medium simulates the wear and tear of the product in daily life.
Taber 6100 oscillation wear instrument / 6100 oscillation wear tester test method:
1. Allows the user to use a liquid abrasive slurry for wear and tear testing.Buy the relevant accessories, the user can also lens "Bayer test".The purpose is primarily for comparison with the reference lens.
2. The instrument's test parameters can be adjusted so that the user can choose the length of the back and forth (1,2,3 or 4 inches) and speed (100-200 rounds per minute).In addition, the oscillating mill allows the user to test different types of abrasive media including quartz sand, alumina, emery and glass beads.
Другие товары поставщика
|
|
Single Burning Item |
Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions. Samples were ... |
|
|
Comfortable Thermal Manikin |
Thermal Manikin environment test simulation manikin exchange heat from the external environment by simulating the real physiological mechanism. Com... |
|
|
Roller Shear Foam Fatigue Tester |
The drum shear foam fatigue testing machine is used to determine the compressive fatigue resistance of foam materials. The drum applies constant tr... |
|
|
Stoll Quartermaster |
Standards:
ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15J2/BN 112-01
Applications:
The Stoll Quartermaster
can condu... |
|
|
Moisture Management Tester |
Applications:
TheMoisture Management Tester (MMT)is an equipment to measure the dynamic liquid transport properties of textiles such as knitted an... |
Все товары поставщика
Похожие товары
