Filter Media Testing System
Standards
ISO 11155-1 / DIN 71460-1
Technical Data
| Measurement range (dimensions) | U-SMPS 2050: 10 – 800 nm |
| Volume flow rate | 0.48 – 5.76 m³/h (pressurized operation) |
| Power supply | 115/230 V, 50/60 Hz |
| External dimensions | Approx. 600•1.800•900 mm (W•H•D) |
| Inflow velocity | 1.3 – 16 cm/s (other specifications available upon request) |
| Differential pressure measurement | 0 – 2.500 Pa (others available upon request) |
| Media testing area | 100 cm² |
| Aerosol | Dust (e.g., SAE dust), salt (e.g., NaCl, KCl), liquid aerosols (e.g., DEHS) |
| Compressed air supply | 6 – 8 bar |
Benefits
• Simultaneous measurement of particles in both feed gas and clean gas
• Particle size measurement range: 0.2 – 40 µm
• Maximum concentration = 10⁶ particles/cm³ (undiluted)
• Internationally comparable measurement results
• Widely distributed measurement systems
• High repeatability of test methods
• Easy to use with various test aerosols, such as SAE coarse powder, NaCl/KCl, DEHS
• Maximum raw gas concentrations up to >1000 mg/m³ (ISO Fine) or >5000 mg/m³ (ISO Coarse), capable of measuring fraction separation efficiency for load testing
• Flexible filter testing software FTControl
• Pressure loss measurement, fraction separation efficiency measurement, and load measurement procedures
• Easy to operate, even untrained personnel can quickly use the equipment
• Short setup time
• Customer-initiated cleaning and calibration
• Easy use of measurement technology components – even in other applications
• Mobile setup, easy to move on casters
• Reliable operation
• Verify the functionality of individual components and the entire system during pre-delivery acceptance testing and upon delivery.
• Low maintenance
• This equipment will reduce your operating costs.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fogging Tester | 1. Evaluating Material Fogging Performance The fogging tester is primarily used to evaluate the evaporation of volatile components from interior m... |
 |
Blackboard Shaker | The Blackboard Shaker is a precision instrument designed for evaluating the appearance quality of yarns. It shakes yarns of specified density acros... |
 |
Fabric Downproof Tester(Rolling Box) - Test Equipment | Standards GB/T 12705.1:Textile -Methods of testing the down-proof properties of fabrics- Part 1: Rubbing test; GB/T 14272：Requirements of down ga... |
 |
Static Tensile Tester | Standard ASTM D3107Ensurereliable measurement of fabric elongation and tensile properties under controlled force applications. Product Advantages... |
 |
True Body Weight Ingress Egress Tester | The tester applies repeated motion sequences to the seat to simulate realistic human ingress and egress. Key evaluation criteria include: Seat fra... |
Похожие товары
 |
Blanket Flammability Test Machine | Продавец: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Продавец: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Продавец: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Продавец: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Продавец: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
