Limiting Oxygen Index Tester
Limiting Oxygen Index Tester The oxygen index of the material refers to the minimum oxygen concentration that can maintain the combustion of the material in the mixture of nitrogen and oxygen.At an appropriate oxygen concentration, the material is just right to ignite and burn.By controlling the value of oxygen concentration, this instrument can observe the combustion characteristics of samples one by one under different oxygen concentrations, so as to determine the ultimate oxygen index of samples.Good repeatability of experimental data can help manufacturers effectively control production and test product performance.
Standards compliant
GBT 2406.1 Plastics Test of burning behaviour by oxygen index-Part 1: guideline;
GBT 2406.2 Plastics Test of burning behaviour by oxygen index -Part 2: Indoor-temperature test;
GBT 5454 Textiles Performance test of burning by oxygen index;
GBT 10707 Rubber Performance test of burning behaviour;
ISO 4589-2 Plastics Test of burning behaviour by oxygen index -Part 2: Indoor-temperature test;
ASTM -- D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration of material combustion which is similar to plastics material (Oxygen Index);
IS0 4589-3 (Please inquire separately for the apparatus for the
ISO 4589-2 " Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test”
NES 714, EN 45545-2，JIS 7201, BS 2782. etc.,
Major Features
Imported sensors
Imported Paramagnetic oxygen concentration sensor with high precision and stable performance.Real-time detection of oxygen concentration with PLC precise control so that can adjust the oxygen concentration through the airflow.
Flexible fixture design
The fixture is made of refractory and stainless material, which can resist high temperature and rust.It can hold various samples.By replacing the sample holder, the sample requirements of different characteristics can be fulfilled.
Linited Oxygmn Indes Testet
Intelligent touch operation 7-inch color screen, intelligent touch, multi-touch operating system, convenient operation, multi-language display, switching between
Chinese and English.Simplified operation interface, easy to operate
Quick change structural design
The test tube of this instrument which is made of high temperature resistant transparent glass combing with the base adopts quick change design to clearly observe the combustion situation in the test. Moreover, it is easy to clean after the test. The stainless steel base can avoid the influence of various corrosion on the test data, and its service life is long.
Field Application
This instrument measures the minimum oxygen volume percentage concentration at just required for maintaining combustion of the polymer.it is suitable for a wide range of materials by changing the sample fixture used in a variety of mechanical properties of the sample.lt can be used for the determination of burning performance of plastics, rubber, fiber, foam, film, textile and wood.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Technical Parameters
|
Operating mode: Full color touch screen control |
Control range:0~100%, ±0.2% |
|
Language:Chinese-English interface |
Inlet air pressure:≤1MPa |
|
Burner:Inner Radius79mm;height500mm |
test air pressure:0.15-0.2MPa |
|
Glass beads: 4mm,height 80-100mm |
Gas flow rate: 12.01L/min |
|
Igniter inner diameter:2mm |
Dimension:700 mmx750mmx460 mm |
|
Igniter length:400mm |
Weight:45kg |
|
Air inlet: 7mm |
Power supply:220V 50Hz |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Vertical Fire Testing Furnace | Fire resistance performance of material provide important information for evaluation samples and Assembly properties. This furnace is a quantitativ... |
 |
Large Flame Flammability Tester | IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq... |
 |
Medical injection needle puncture force tester | The Medical Injection Needle Puncture Force Tester is a precision instrument designed to evaluate the puncture performance of medical needles. It s... |
 |
Floor material combustion tester | Scope of application: The floor material combustion test device is suitable for all kinds of floor materials, such as textiles, carpets, cork boar... |
 |
Sublimation Fastness Tester/Scorch Tester - Test Equipment | Color fastness tester for ironing sublimation - Testing instrument for ironing color fastness of materials G247B Color fastness tester for ironing... |
Похожие товары
 |
Air Intake Filter Test System | Продавец: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Продавец: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Продавец: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Продавец: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
