Fiber Oil Extractor - lab instrument

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Email: serving@qinsun-lab。com

Rapid Grease Extraction Apparatus

Testing Standards

Edana method ERT 155

Applications:

Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and evaporation. Suitable for fiber, yarn or fabric. Available with 1. 2 or 3 extraction units.

Product Information:

The Rapid Grease Extraction Apparatus was developed specifically for obtaining the oil content of tops and similar materials sufficiently quickly for the results to be available at the time of processing.

The principle of extraction is percolation of a solvent through the wool sample in a simple metal tube. The extract, as it drips from the tube, is collected by a light aluminium tray held between two metal rings mounted on a temperature-controlled hot-plate.

Features:

1.The instrument consists of pedestal, extraction tub, weight, plunger, cotton wool plug, tray, and the hot-plate.

2.The tube should be positioned in the hole in the lower support member of the apparatus, and the plunger boss placed in the hole in the upper support member.

3.In use the plunger is placed through the boss and down into the tube. The weight is then located on top of the plunger.

Testing Method:

Before starting a series of tests, the hot-plate is allowed to warm up to a suitable temperature (set by the power regulator knob). The correct temperature has been obtained when the solvent evaporates from the dish almost as quickly as fresh solution filters through to replace it. This prevents flooding of the tray and losing oil to the brass ring.

The temperature must not be too high, however, or the solvent will evaporate violently as the drops of solution hit the hot tray.

Before each test a pre-weighed aluminium tray is placed on the hot-plate brass ring. The tray location ring is then placed on the tray to secure it and to maintain a good thermal contact with the lower ring. The bottom of the tray must not touch the hot-plate.

This test method is most suitable for extracting loose wool or combed slivers, but it may also be used for yarn. It is not suitable for fabric unless it is first disintegrated into yarn to facilitate uniform packing in the extraction tube.

Technical Parameters

1.Range of temperature: ambient temperature-250℃;

2.Loading mode: aggravate weights;

3.Timing range: 1-9999min;

4.Accuracy of temperature control: ±1℃;

5.Number of specimens: 3;

6.Extracting solvent: Petroleum ether, ether and dichloromethane;

7.Outside dimension: 170×170×380mm(L×W×H);

8.Weight: 4.4kg(9.7lb);

9.Power supply: AC220V, 720W;

10.Power dissipation >: 175W.

Product Display

Другие товары поставщика

	Wyzenbeek or Oscillatory Abrasion Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester...
	Sweating Thermal Manikin - lab instrument	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Walter sweating manikins are designed with high acc...
	JIS Rubbing Color Fastness Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Rubbing Color Fastness Tester is suitable for rubbing color fastness testing o...
	Automobile Headrest Strength Tester FMVSS 202	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automobile Headrest Strength Tester is designed to evaluate the ultimate stren...
	Metal Wire Wrap Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is designed to evaluate the ductility and winding perfo...

Все товары поставщика

Похожие товары

	Metal Angular Fixator Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine...
	Bone Plate Four-Point Bending Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue...
	Bone Plates Static Four - point Bending Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending...
	Spinal Internal Fixation System Assembly Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem...
	Spinal Internal Fixation System Component Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo...