.

Fiber Oil Extractor - lab instrument

Rapid Grease Extraction Apparatus

Testing Standards

Edana method ERT 155

Applications:

Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and evaporation. Suitable for fiber, yarn or fabric. Available with 1. 2 or 3 extraction units.

Product Information:

The Rapid Grease Extraction Apparatus was developed specifically for obtaining the oil content of tops and similar materials sufficiently quickly for the results to be available at the time of processing.

The principle of extraction is percolation of a solvent through the wool sample in a simple metal tube. The extract, as it drips from the tube, is collected by a light aluminium tray held between two metal rings mounted on a temperature-controlled hot-plate.

Features:

1.The instrument consists of pedestal, extraction tub, weight, plunger, cotton wool plug, tray, and the hot-plate.

2.The tube should be positioned in the hole in the lower support member of the apparatus, and the plunger boss placed in the hole in the upper support member.

3.In use the plunger is placed through the boss and down into the tube. The weight is then located on top of the plunger.

Testing Method:

Before starting a series of tests, the hot-plate is allowed to warm up to a suitable temperature (set by the power regulator knob). The correct temperature has been obtained when the solvent evaporates from the dish almost as quickly as fresh solution filters through to replace it. This prevents flooding of the tray and losing oil to the brass ring.

The temperature must not be too high, however, or the solvent will evaporate violently as the drops of solution hit the hot tray.

Before each test a pre-weighed aluminium tray is placed on the hot-plate brass ring. The tray location ring is then placed on the tray to secure it and to maintain a good thermal contact with the lower ring. The bottom of the tray must not touch the hot-plate.

This test method is most suitable for extracting loose wool or combed slivers, but it may also be used for yarn. It is not suitable for fabric unless it is first disintegrated into yarn to facilitate uniform packing in the extraction tube.

Technical Parameters

1.Range of temperature: ambient temperature-250℃;

2.Loading mode: aggravate weights;

3.Timing range: 1-9999min;

4.Accuracy of temperature control: ±1℃;

5.Number of specimens: 3;

6.Extracting solvent: Petroleum ether, ether and dichloromethane;

7.Outside dimension: 170×170×380mm(L×W×H);

8.Weight: 4.4kg(9.7lb);

9.Power supply: AC220V, 720W;

10.Power dissipation >: 175W.

Product Display


在线联系供应商

至: Standard Groups
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Carbon Arc Aging Chamber
Carbon Arc Aging Chamber The Carbon Arc Aging Chamber employs alternating current to ignite carbon rods, generating an arc light source. After passing through a filter, thi...
Textile Far Infrared Radiation Temperature Rise Tester - Test Equipment
Textile Far Infrared Radiation Temperature Rise Tester - Test Equipment Application ScopeThis instrument is used to determine the far-infrared properties of various textile products, including fibers, yarns, fabrics, no...
Textile Formaldehyde Content Tester
Textile Formaldehyde Content Tester In China, the national mandatory standard "national textile products basic safety technical specifications" GB18401-2003. with effect from 1 Januar...
Deval abrasion testing machine
Deval abrasion testing machine The Deval Abrasion Testing Machine is designed to measure the wear resistance of stones and aggregates under dry or wet conditions. It provides rel...
Fabric Downproof Impact Tester
Fabric Downproof Impact Tester Product Information: TheDrill Flocking Performance Testercould test down and/or feather penetration through the primary tick fabric of a specime...
供应产品

Same products

Air Intake Filter Test System
Air Intake Filter Test System 卖方: Standard Groups The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
Mattress Spring Fatigue Tester,ASTM D3574 ,how to test mattress for sagging
Mattress Spring Fatigue Tester,ASTM D3574 ,how to test mattress for sagging 卖方: Standard International Group (HK) Limited The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
Mattress Rollator,ASTM F1566 ,Mattress Durability Tester,Mattress Fatigue Tester
Mattress Rollator,ASTM F1566 ,Mattress Durability Tester,Mattress Fatigue Tester 卖方: Standard International Group (HK) Limited The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
HD2 Pneumatic Foam Fatigue Tester,ISO 3385,Foam Fatigue Testing Machine
HD2 Pneumatic Foam Fatigue Tester,ISO 3385,Foam Fatigue Testing Machine 卖方: Standard International Group (HK) Limited The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
VW Heel Abrasion Tester,ISO 4649 ,Heel Performance Testing Machine
VW Heel Abrasion Tester,ISO 4649 ,Heel Performance Testing Machine 卖方: Standard International Group (HK) Limited The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...